Aerospace Mechanics - Keyword Index

Keyword Index

A

Abrasive wear Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
Absorption Refrigeration Thermodynamic and exergoeconomic analysis and optimization of a Standard ammonia-water generator-absorber heat exchange (GAX) based absorption refrigeration cycle [Volume 16, Issue 3, 2020, Pages 21-34]
Acceleration optimization The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
Accelerometer [Volume 14, Issue 4, 2018, Pages 75-89]
Accelerometers Accurate Navigation of Marine Vessel, Using the Integration of Inertial Navigation System (INS) and Global Positioning System (GPS), Applying Extended Kalman Filter [Volume 15, Issue 1, 2019, Pages 153-165]
Acoustic emission [Volume 14, Issue 1, 2018, Pages 1-10]
Acoustic mode Analysis and Experimental Investigation of Pressure Oscillation in the Combustion Chamber of a Subscale Solid Rocket Motor [Volume 16, Issue 1, 2020, Pages 39-52]
Active and nonlinear vehicle suspension system Bi-objective Optimization Design of Active and Nonlinear Vehicle Suspension System Under Combinatorial Random Road Profile [Volume 20, Issue 1, 2024, Pages 89-105]
Active braking control A New Steering and Braking Control Strategy for Tractor Semi-Trailer Truck During a Critical Lane Change Maneuver [Volume 20, Issue 1, 2024, Pages 59-75]
Active Control Active Control of Suspension Oscillations in Aircraft by using NARMA-L2 Neural Controller [Volume 19, Issue 2, 2023, Pages 41-55]
Active Force Control [Volume 13, Issue 4, 2017, Pages 89-98]
Active steering control A New Steering and Braking Control Strategy for Tractor Semi-Trailer Truck During a Critical Lane Change Maneuver [Volume 20, Issue 1, 2024, Pages 59-75]
Active suspension system Integrated Control of Active Suspension and Anti-lock Braking System Based on the Nonlinear Improved Sliding Mode Control System [Volume 16, Issue 4, 2020, Pages 61-70]
Active Thermography Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
Active vibration control Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
Active vibration control Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]
Actuator failure Design and Experimental Implementation of Adaptive Actuator Failure Compensator for Spacecraft Attitude Control Simulator [Volume 20, Issue 1, 2024, Pages 27-43]
Actuator Rate Saturation Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
Actuator redundancy Design and Experimental Implementation of Adaptive Actuator Failure Compensator for Spacecraft Attitude Control Simulator [Volume 20, Issue 1, 2024, Pages 27-43]
Adaptive backstepping approach Robust Adaptive Backstepping Control of Automated Vehicle Convoys in the Presence of Combined Actuator Fault, Parameter Uncertainties, and External Disturbance by Considering Speed Constraints [Volume 19, Issue 4, 2023, Pages 119-133]
Adaptive backstepping control Design and Experimental Implementation of Adaptive Actuator Failure Compensator for Spacecraft Attitude Control Simulator [Volume 20, Issue 1, 2024, Pages 27-43]
Adaptive Control Implementation of Adaptive and Proportional-Integral Algorithms in Servo Hydraulic Fatigue Testing Machines [Volume 12, Issue 4, 2016, Pages 1-9]
Adaptive Estimator Design of a Conntroller for Using MEMS Vibrational Gyroscope System [Volume 15, Issue 3, 2019, Pages 1-16]
Adaptive extended Kalman filter Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
Adaptive feedback linearization control Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
Adaptive fuzzy observer Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
Adaptive Neuro-Fuzzy Inference System Milling Tool Wear Prediction by Feed Motor Current Signal using MLPs and ANFIS [Volume 15, Issue 1, 2019, Pages 51-62]
Adaptive sliding mode control Finite Time Adaptive Sliding Mode Control of Multi-agent Systems via Unknown External Disturbance and Undirected Network [Volume 19, Issue 3, 2023, Pages 137-148]
Adaptive Structures The Experimental and Numerical Investigation of Non-Symmetric Bi-Stability in Hybrid Composite Plates for Application in Adaptive Structures [Volume 17, Issue 4, 2021, Pages 15-27]
Adaptive Terminal Sliding Mode Control Design of a Conntroller for Using MEMS Vibrational Gyroscope System [Volume 15, Issue 3, 2019, Pages 1-16]
Additive manufacturing Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
Additive manufacturing Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
Additive manufacturing Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
Adherend layer Minimization of Peeling Stress in an Adhesively Single-lap Joint Using the Bees Algorithm [Volume 16, Issue 4, 2020, Pages 71-83]
Adhesive Investigating the Effect of 2-D Defects on Tensile and Creep Behavior of Single-lap Ceramic-metal Adhesive Joints [Volume 18, Issue 2, 2022, Pages 67-78]
Adhesive joint Minimization of Peeling Stress in an Adhesively Single-lap Joint Using the Bees Algorithm [Volume 16, Issue 4, 2020, Pages 71-83]
Adhesive layer Minimization of Peeling Stress in an Adhesively Single-lap Joint Using the Bees Algorithm [Volume 16, Issue 4, 2020, Pages 71-83]
Adhesive wear Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
Adjacent Equilibrium Criterion Analytical Solution for Buckling of Annular Sectorial Porous Plates [Volume 15, Issue 1, 2019, Pages 137-152]
Aerodynamic Coefficients Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
Aerodynamic Instability Analysis of Instabilities in Compressor of J79 Engine [Volume 14, Issue 3, 2018, Pages 95-104]
Aerodynamic Interference Numerical Analysis of Aerodynamic Interference of Two Passing Cylindrical Bodies at Supersonic Speeds [Volume 19, Issue 3, 2023, Pages 79-95]
Aeroelasticity Flutter Control of a Quasi-three-dimensional Wing in Simplified Unsteady Flow using Forced Jet [Volume 20, Issue 1, 2024, Pages 45-58]
Aircraft Active Control of Suspension Oscillations in Aircraft by using NARMA-L2 Neural Controller [Volume 19, Issue 2, 2023, Pages 41-55]
Airplane Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
Airplane Flight Simulator Design of Electromechanical Motion System for an Aircraft Flight Simulator [Volume 15, Issue 3, 2019, Pages 61-77]
Aluminum 3003 Finite Element and Experimental Investigation of Aluminum Tube by Equal Channel Angular Pressing [Volume 15, Issue 2, 2019, Pages 131-144]
Aluminum alloy 6061 Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
Analytical modeling Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
Analytical Relationship Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
Analytical solution Analytical Modeling of Impact loading of Nanoparticles on the Nano-curved Plate [Volume 17, Issue 1, 2021, Pages 69-81]
ANFIS [Volume 14, Issue 4, 2018, Pages 101-113]
ANFIS Multi-Sensory Data Fusion System for Tool Condition Monitoring Using Optimized Artificial Fuzzy Inference System [Volume 15, Issue 2, 2019, Pages 103-118]
Annular Sectorial Plate Analytical Solution for Buckling of Annular Sectorial Porous Plates [Volume 15, Issue 1, 2019, Pages 137-152]
Anti-lock Braking System Integrated Control of Active Suspension and Anti-lock Braking System Based on the Nonlinear Improved Sliding Mode Control System [Volume 16, Issue 4, 2020, Pages 61-70]
Approximate Minimal Robust Positive Invariant Set Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
Articulated Heavy Vehicle Model predictive control design for a heavy articulated vehicle during critical lane change maneuver [Volume 16, Issue 2, 2020, Pages 39-53]
Articulated Vehicle (AV) Automated guided of articulated heavy vehicle in traffic situation by sliding-mode controller [Volume 16, Issue 2, 2020, Pages 1-14]
Atomic force microscope Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
Attitude control Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control [Volume 19, Issue 4, 2023, Pages 41-52]
Attitude Dynamics and Control Applying Robust Quasi-Sliding Mode Approach for Attitude Control of a Flexible Spacecraft [Volume 19, Issue 3, 2023, Pages 97-108]
Attitude estimation Data Fusion of Gyroscope and Magnetometer to Estimate the Attitude of High-Speed Projectiles Based on Particle Filter and PSO [Volume 16, Issue 1, 2020, Pages 15-30]
Attitude & heading reference system Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
Augmented Proportional Navigation In this paper, extended sliding mode observer is used for estimating of target maneuver for applying of augmented proportional navigation in terminal guidance phase of homing interceptors. Implementation of augmented proportional navigation is dependent on estimation target acceleration. Nonlinear estimation of target acceleration is desired, because of nonlinear engagement geometry in terminal phase. Therefore in this [Volume 13, Issue 4, 2017, Pages 1-10]
Automatic Landing of Aircraft Control Allocation Based on Fuzzy Approach for Landing Phase of Specific Aircraft [Volume 19, Issue 2, 2023, Pages 1-10]
Autonomous Underwater Vehicle A Model-Aided Inertial Navigation System for the Remus 100 AUV [Volume 17, Issue 3, 2021, Pages 57-70]
Autopilot Designing of a Flying Boat Height Holder Based of the Fuzzy Controller [Volume 12, Issue 4, 2016, Pages 11-23]
Autopilot dynamic A Model of Predictive Terminal Guidance Based on Whale Optimization Algorithm Considering the Aerodynamic Model of the Pursuer [Volume 17, Issue 1, 2021, Pages 37-50]
Autoregressive Markov Regime Switching (ARMRS) Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Axial and internal pressure Vibrations of a Rotating Functionally Graded Cylindrical Shell under Pressure with Ring and Stringer Stiffened [Volume 15, Issue 4, 2019, Pages 1-14]
Axial buckling Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
Azimuth Misalignment A Novel Approach for Estimating the Initial Alignment of INS based on the Kalman Filter and an Estimator with Unknown Input [Volume 17, Issue 1, 2021, Pages 1-11]

B

Backing Material [Volume 14, Issue 2, 2018, Pages 19-26]
Backstepping Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control [Volume 19, Issue 4, 2023, Pages 41-52]
Backstepping Control Trajectory tracking of a wheeled mobile robot using Backstepping and Sliding mode approaches [Volume 16, Issue 1, 2020, Pages 83-98]
Backstepping Control The Design and Comparison of Backstepping Fuzzy Control and Fuzzy Sliding Mode Control for Controlling Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 17, Issue 3, 2021, Pages 17-36]
Balling effect The Study of Scan Speed and Laser Power Effects on the Molten Pool in Selective Laser Melting of Ti6Al4V Based on the Molten Motion Equations [Volume 17, Issue 3, 2021, Pages 1-15]
Ballistic limit thickness Investigating the Penetration and Fragmentation of the PELE Projectile using the Methods of Dynamic Expansion of the Spherical Cavity and the Shock Wave [(Articles in Press)]
Ballistic targets A Guidance law for interception of very high-speed targets using a simulator-based learning algorithm [Volume 16, Issue 3, 2020, Pages 49-57]
Bearing fault detectionک Empirical mode decomposition [Volume 14, Issue 4, 2018, Pages 101-113]
Bees algorithm Optimizing the Cooling System of an LH2/LOX Rocket Engine using the Bees Algorithm [Volume 19, Issue 3, 2023, Pages 109-121]
Behavioral Guidance Behavioral Guidance and Control of a Flying Robot for Leader-Follower Concept [Volume 15, Issue 1, 2019, Pages 13-24]
Bifurcation diagram Load Effect on the Perturbed Oscillation Damping Ability of an Unbalanced Rotor in Three Lobe Bearings [Volume 16, Issue 3, 2020, Pages 35-48]
Bi-metallic Liner Numerical Analysis of Shaped Charge Bimetallic Liners Effects on Diameter and Depth of Penetration into Steel Targets [Volume 15, Issue 3, 2019, Pages 93-105]
Bi-objective optimization Bi-objective Optimization Design of Active and Nonlinear Vehicle Suspension System Under Combinatorial Random Road Profile [Volume 20, Issue 1, 2024, Pages 89-105]
Bi-Stable Composite Laminates The Experimental and Numerical Investigation of Non-Symmetric Bi-Stability in Hybrid Composite Plates for Application in Adaptive Structures [Volume 17, Issue 4, 2021, Pages 15-27]
Blade powder dispersion Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
Blast Loading Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
Blunt-cone Configuration [Volume 14, Issue 4, 2018, Pages 21-32]
Booster Landing Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
Boron Nitride Nanotubes Analytical Analysis for Free Vibration of Different Arrangements of BNNTs under Initially Stress [Volume 15, Issue 3, 2019, Pages 33-46]
Boundary Conditions Static and Dynamic Stability Analysis of Pipes Conveying Fluid with Different Boundary Conditions [Volume 17, Issue 1, 2021, Pages 1-10]
Boundary Element Method Analysis of Heat Conduction in a Quadratic Functionally Graded Plane by Boundary Element Method Based on the Variable Transmission Approach [Volume 15, Issue 2, 2019, Pages 77-89]
Bounded Disturbance Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
Brinson model Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
B-spline Curves Optimal Reentry Guidance using a Combined Method [Volume 12, Issue 4, 2016, Pages 35-48]
Buckling [Volume 14, Issue 1, 2018, Pages 11-26]
Buckling [Volume 14, Issue 1, 2018, Pages 27-38]
Buckling Analytical Solution for Buckling of Annular Sectorial Porous Plates [Volume 15, Issue 1, 2019, Pages 137-152]
Buckling Buckling and Post-buckling Analysis of a Sandwich Panel with Flexible Core Reinforced with Memory Alloy Wires (SMA) [Volume 17, Issue 1, 2021, Pages 83-97]
Buckling A Molecular Dynamics Study on the Buckling Analysis of Functionalized Graphene with Nylon 6,6 in Aqueous Environment [Volume 19, Issue 4, 2023, Pages 1-10]

C

CAD/CAM Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]
Calibration [Volume 14, Issue 2, 2018, Pages 27-42]
Canonical transformation The Design of a Seat Controller for the Half Car Model in Various Vibrating Conditions Using the Seated Human Body Situation [Volume 17, Issue 4, 2021, Pages 29-38]
Cantilever Beam The Width Reduction Effect of a Piezoelectric Energy Harvesting Composite Beam on Output Power: An Experimental and Analytical Study [Volume 17, Issue 3, 2021, Pages 71-83]
Cantilever impacting beams Energy Harvesting from Nonlinear Vibrating System Using Two Impacting Cantilever Beam [Volume 15, Issue 1, 2019, Pages 75-88]
Carbon fiber-epoxy [Volume 14, Issue 1, 2018, Pages 1-10]
Carbon nano-onions Modeling the Oscillatory Behavior of Carbon Nano-onions Inside Single-walled Carbon Nanotubes Based on the Continuum Approximation Method [Volume 19, Issue 4, 2023, Pages 135-148]
Carbon nanotube [Volume 14, Issue 1, 2018, Pages 55-64]
Carbon nanotube [Volume 14, Issue 1, 2018, Pages 97-111]
Carbon nanotube Investigation of Functionally Graded Carbon Nanotube Distribution Effect on the Frequency of Annular Sector Plates on Pasternak Elastic Foundation [Volume 15, Issue 1, 2019, Pages 89-106]
Carbon nanotube Performance Improvement of the Solar Heat Pump Using Carbon Nanotubes in the Refrigerant and its Condenser Structure [Volume 16, Issue 3, 2020, Pages 75-84]
Carbon nanotube Experimental Study on the Effect of Adding Multi-walled Carbon Nanotubes on the Ballistic Limit of Fibers Metal Laminates [Volume 19, Issue 4, 2023, Pages 27-39]
Carbon-Phenolic Nanocomposites Thermal Behavior The Investigation of the Nano-Clay Effects on Thermal Behavior and Ignition Resistance of the Phenolic-Carbon Nanocomposite [Volume 17, Issue 3, 2021, Pages 37-43]
Catalyst particles Size Numerical Study of Catalyst Bed Length and Particle Size Effect on the Monopropellant Thruster Specific Impulse and Thrust [Volume 16, Issue 1, 2020, Pages 53-66]
Catalytic Decomposition Numerical Study of Catalyst Bed Length and Particle Size Effect on the Monopropellant Thruster Specific Impulse and Thrust [Volume 16, Issue 1, 2020, Pages 53-66]
Celestial Perturbation Investigation of the LEO Transfer Orbit to GEO Using Lagrangian Points of the Earth-Sun System in the Presence of Perturbations [Volume 15, Issue 4, 2019, Pages 109-120]
Cellulose Piezoelectric The Width Reduction Effect of a Piezoelectric Energy Harvesting Composite Beam on Output Power: An Experimental and Analytical Study [Volume 17, Issue 3, 2021, Pages 71-83]
Central Composite Design Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
Central Composite Design Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
Central composite design (CCD) Optimization of Effective Parameters on the Bending Behavior of Honeycomb Sandwich Panels Using Response Surface Method [Volume 19, Issue 3, 2023, Pages 61-78]
CFRP Numerical Study on Rehabilitation of the Pressurized Pipes Containing Longitudinal External Crack using CFRP under Service Load [(Articles in Press)]
Changing the position of applying magnetic field Numerical Evaluation via Lattice Boltzmann Method to Analyze of Entropy Generation due to Conjugate Mixed Convection Heat Transfer of Non-Newtonian Nanofluid under the Influence of Magnetic Field [Volume 19, Issue 2, 2023, Pages 113-129]
Changing the position of applying speed Numerical Evaluation via Lattice Boltzmann Method to Analyze of Entropy Generation due to Conjugate Mixed Convection Heat Transfer of Non-Newtonian Nanofluid under the Influence of Magnetic Field [Volume 19, Issue 2, 2023, Pages 113-129]
Channel Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade [Volume 14, Issue 3, 2018, Pages 19-28]
Chattering Design of a Conntroller for Using MEMS Vibrational Gyroscope System [Volume 15, Issue 3, 2019, Pages 1-16]
Chattering Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
Chattering Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
Chemical-Mechanical Polishing Optimization of Copper Mirrors Polishing Parameters by Chemical-Mechanical Method [Volume 15, Issue 3, 2019, Pages 119-126]
Circular composite plate Analysis of buckling of circular plate with delamination by using third order shear deformation theory [Volume 16, Issue 2, 2020, Pages 55-62]
Circular plate Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
Circumferential buckling Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
Closed Cycle Studying Piston Cavity Geometry Effect on Direct Injection Diesel Engine Performance and Emissions with Numerical Simulation [Volume 14, Issue 3, 2018, Pages 29-39]
CNT [Volume 14, Issue 1, 2018, Pages 65-80]
Colburn factor Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
Combined actuator fault Robust Adaptive Backstepping Control of Automated Vehicle Convoys in the Presence of Combined Actuator Fault, Parameter Uncertainties, and External Disturbance by Considering Speed Constraints [Volume 19, Issue 4, 2023, Pages 119-133]
Combined heat transfer The Combination of Discrete Ordinates and Full-Spectrum k-Distribution Methods to Analysis of Radiative-Conductive Heat Transfer in a Two Dimensional Enclosure [Volume 17, Issue 1, 2021, Pages 51-67]
Combustion Modeling of Gas Turbine Combustion Chamber; By Using Network Method [Volume 14, Issue 3, 2018, Pages 1-17]
Combustor Modeling of Gas Turbine Combustion Chamber; By Using Network Method [Volume 14, Issue 3, 2018, Pages 1-17]
Comeld Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
Compact heat exchanger Exergy Analysis of a Gas to Liquid Compact Heat Exchanger as an Intercooler in Various Working Conditions [Volume 16, Issue 3, 2020, Pages 85-98]
Complementary filter Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
Component and actuator faults Fault-Tolerant Optimal Attitude Tracking Control of Quadrotor Subject to State and Input Constraints Using Safe Reinforcement Learning [Volume 20, Issue 1, 2024, Pages 143-162]
Composite [Volume 14, Issue 1, 2018, Pages 1-10]
Composite Dynamic and Vibration Analysis of Composite Cylindrical Shell with Piezoelectric Layers [Volume 16, Issue 2, 2020, Pages 15-25]
Composite Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
Composite Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]
Composite continuous fibers Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]
Composite grid-stiffened cylindrical shell A Dynamic Stability Analysis of Composite Grid-Stiffened Cylindrical Shells under Harmonic Loads Using the Donnelly Theory [Volume 17, Issue 4, 2021, Pages 55-79]
Composite laminates Experimental Study of the Impact of Interlayer Elastomeric Foam on Failure Pattern of Composite Laminated Panels with Various Layups [Volume 19, Issue 3, 2023, Pages 1-15]
Composite Material Nonlinear Vibration Analysis of a Composite Cylindrical Shell on a Viscoelastic Foundation and under Subsonic External Air Flow [Volume 15, Issue 3, 2019, Pages 127-139]
Composite Material Nonlinear Vibration analysis of a composite cylindrical shell with internal pressure, subjected to a low velocity impact using analytical and FE methods [Volume 16, Issue 3, 2020, Pages 59-73]
Composite metal base Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
Composite plates Low Velocity Impact Analysis of Laminated Composite Plates with using modified contact law [Volume 16, Issue 2, 2020, Pages 63-75]
Composites shells [Volume 14, Issue 1, 2018, Pages 27-38]
Compressible Concrete Optimizing the shape of the penetrator nose into Compressible Concrete in order to achieve the maximum penetration depth [Volume 17, Issue 2, 2021, Pages 101-115]
Compressor Analysis of Instabilities in Compressor of J79 Engine [Volume 14, Issue 3, 2018, Pages 95-104]
Compressor cracked blade Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
Computational Fluid Dynamics Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade [Volume 14, Issue 3, 2018, Pages 19-28]
Comsol multyphysics software Design and Simulatuion of a Hybrid Nano Piezoelectric Resistive-Capacitive Accelerometer Sensor [Volume 15, Issue 4, 2019, Pages 67-82]
Condenser Performance Improvement of the Solar Heat Pump Using Carbon Nanotubes in the Refrigerant and its Condenser Structure [Volume 16, Issue 3, 2020, Pages 75-84]
Conjugate Heat Transfer Numerical Evaluation via Lattice Boltzmann Method to Analyze of Entropy Generation due to Conjugate Mixed Convection Heat Transfer of Non-Newtonian Nanofluid under the Influence of Magnetic Field [Volume 19, Issue 2, 2023, Pages 113-129]
Constant Threshold Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
Constitutive model Implementation of Shape Memory Alloy Spring Behavior in a Mechanism as a Torsional Actuator for Position Changing of Rocket Wing [Volume 17, Issue 1, 2021, Pages 99-114]
Contact non-linear equation Low Velocity Impact Analysis of Laminated Composite Plates with using modified contact law [Volume 16, Issue 2, 2020, Pages 63-75]
Continuum approximation method Modeling the Oscillatory Behavior of Carbon Nano-onions Inside Single-walled Carbon Nanotubes Based on the Continuum Approximation Method [Volume 19, Issue 4, 2023, Pages 135-148]
Contrary mechanisms Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
Control Allocation Control Allocation Based on Fuzzy Approach for Landing Phase of Specific Aircraft [Volume 19, Issue 2, 2023, Pages 1-10]
Control of Workpiece Detecting a defective pin through the image processing in the production line [Volume 16, Issue 2, 2020, Pages 87-96]
Control simulator Design and Experimental Implementation of Adaptive Actuator Failure Compensator for Spacecraft Attitude Control Simulator [Volume 20, Issue 1, 2024, Pages 27-43]
Convection Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade [Volume 14, Issue 3, 2018, Pages 19-28]
Convective heat transfer coefficient Improving Performance and Decreasing of Cooling System Volume in Low Temperature PEM Fuel Cell Using Nanofluid [Volume 15, Issue 2, 2019, Pages 1-16]
Convolutional Neural Network Diagnosis of Diesel Engine Based on Oil Analysis Using Convolutional Neural Network and Visualization [Volume 19, Issue 3, 2023, Pages 123-136]
Cooling flow field Improving Performance and Decreasing of Cooling System Volume in Low Temperature PEM Fuel Cell Using Nanofluid [Volume 15, Issue 2, 2019, Pages 1-16]
Cooling fluid Improving Performance and Decreasing of Cooling System Volume in Low Temperature PEM Fuel Cell Using Nanofluid [Volume 15, Issue 2, 2019, Pages 1-16]
Cooling system Optimizing the Cooling System of an LH2/LOX Rocket Engine using the Bees Algorithm [Volume 19, Issue 3, 2023, Pages 109-121]
Coordinate Measuring Machine Detecting a defective pin through the image processing in the production line [Volume 16, Issue 2, 2020, Pages 87-96]
Coordinate Systems [Volume 14, Issue 4, 2018, Pages 75-89]
COP Thermodynamic and exergoeconomic analysis and optimization of a Standard ammonia-water generator-absorber heat exchange (GAX) based absorption refrigeration cycle [Volume 16, Issue 3, 2020, Pages 21-34]
Copper Optimization of Copper Mirrors Polishing Parameters by Chemical-Mechanical Method [Volume 15, Issue 3, 2019, Pages 119-126]
Corrosion Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
Corrugated core Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
Coupled Eulerian&ndash Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
Crack Numerical Study on Rehabilitation of the Pressurized Pipes Containing Longitudinal External Crack using CFRP under Service Load [(Articles in Press)]
Crack growth Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
Crater Hole Diameter Numerical Analysis of Shaped Charge Bimetallic Liners Effects on Diameter and Depth of Penetration into Steel Targets [Volume 15, Issue 3, 2019, Pages 93-105]
Critical buckling load [Volume 14, Issue 4, 2018, Pages 1-19]
Cutting Tool Multi-Sensory Data Fusion System for Tool Condition Monitoring Using Optimized Artificial Fuzzy Inference System [Volume 15, Issue 2, 2019, Pages 103-118]
Cylindrical Shell Nonlinear Vibration Analysis of a Composite Cylindrical Shell on a Viscoelastic Foundation and under Subsonic External Air Flow [Volume 15, Issue 3, 2019, Pages 127-139]
Cylindrical Shell Nonlinear Vibration analysis of a composite cylindrical shell with internal pressure, subjected to a low velocity impact using analytical and FE methods [Volume 16, Issue 3, 2020, Pages 59-73]
Cylindrical Shell Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
Cylindrical Shell Investigating the Energy Absorption Parameters of Steel Cylindrical Shells Filled with Polyethylene Subjected to Quasi-static Loading [Volume 18, Issue 4, 2022, Pages 65-76]
Cylindrical shells Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]

D

Damper Torque [Volume 13, Issue 4, 2017, Pages 47-58]
Data Fusion A Model-Aided Inertial Navigation System for the Remus 100 AUV [Volume 17, Issue 3, 2021, Pages 57-70]
Data Fusion Implementation of GPS / INS Fusion Algorithm Using GPS Pseudo-Range [Volume 18, Issue 4, 2022, Pages 105-118]
Dead End Mode Operation Experimental Investigation of the Effect of Cathode Side Liquid Water Accumulation on the Impedance of a Dead Ended Polymer Electrolyte Membrane Fuel Cell by Electrochemical Impedance Spectroscopy Method [Volume 19, Issue 2, 2023, Pages 95-111]
Decentralized Control Formation Control of Flying Robots Using Constrained Model Predictive Control While Tracking of Moving Target in Presence of Obstacles [Volume 18, Issue 4, 2022, Pages 29-47]
Decision-making Algorithm Automated guided of articulated heavy vehicle in traffic situation by sliding-mode controller [Volume 16, Issue 2, 2020, Pages 1-14]
Decomposition Chamber Length Numerical Study of Catalyst Bed Length and Particle Size Effect on the Monopropellant Thruster Specific Impulse and Thrust [Volume 16, Issue 1, 2020, Pages 53-66]
Deflection Experimental and Numerical Investigation on the Deviation of High Velocity Blunt Projectile after Impact on the Perforated Plate [Volume 17, Issue 2, 2021, Pages 71-84]
Degradation Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Delta robot Estimation of the Payload mass in DELTA robot by using the motor torque [Volume 16, Issue 2, 2020, Pages 27-38]
Dental Restorations Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]
Describing Function Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
Die forming Female Die Forming of Metallic Plates using Repeated Underwater Explosions [(Articles in Press)]
Different Arrangement of Nanotube Analytical Analysis for Free Vibration of Different Arrangements of BNNTs under Initially Stress [Volume 15, Issue 3, 2019, Pages 33-46]
Differential Flatness Optimal Reentry Guidance using a Combined Method [Volume 12, Issue 4, 2016, Pages 35-48]
Differential Transform Method Free Vibration Analysis Of Thick Functionally Graded Rotating Beam By Differential Transform Method [Volume 12, Issue 4, 2016, Pages 49-61]
Digital Light Processing Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
Dimensional Accuracy Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
Direct Collocation Optimal Reentry Guidance using a Combined Method [Volume 12, Issue 4, 2016, Pages 35-48]
Discrete Time Sliding Mode Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
Disk Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
Distance error Finite Time Adaptive Sliding Mode Control of Multi-agent Systems via Unknown External Disturbance and Undirected Network [Volume 19, Issue 3, 2023, Pages 137-148]
Distance Metering Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
Divergence Static and Dynamic Stability Analysis of Pipes Conveying Fluid with Different Boundary Conditions [Volume 17, Issue 1, 2021, Pages 1-10]
DOE Optimization of Copper Mirrors Polishing Parameters by Chemical-Mechanical Method [Volume 15, Issue 3, 2019, Pages 119-126]
DOM The Combination of Discrete Ordinates and Full-Spectrum k-Distribution Methods to Analysis of Radiative-Conductive Heat Transfer in a Two Dimensional Enclosure [Volume 17, Issue 1, 2021, Pages 51-67]
Donnelly theory A Dynamic Stability Analysis of Composite Grid-Stiffened Cylindrical Shells under Harmonic Loads Using the Donnelly Theory [Volume 17, Issue 4, 2021, Pages 55-79]
Double Membrane system [Volume 14, Issue 2, 2018, Pages 27-42]
Drag forces Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
Dynamic Analysis Dynamic Analysis of a Novel Spherical Parallel Manipulator on the Moving Base Using the Principle of Virtual Work [Volume 17, Issue 2, 2021, Pages 13-27]
Dynamic Analysis Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
Dynamic and static response Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]
Dynamic behavior Load Effect on the Perturbed Oscillation Damping Ability of an Unbalanced Rotor in Three Lobe Bearings [Volume 16, Issue 3, 2020, Pages 35-48]
Dynamic Instability Pull-in [Volume 14, Issue 4, 2018, Pages 61-74]
Dynamic loading [Volume 14, Issue 2, 2018, Pages 27-42]
Dynamic loading The Experimental Study of the Effect of a Diaphragm Thickness on the Position of Planar Shock Wave Formation in a Gas Shock Tube [Volume 15, Issue 4, 2019, Pages 83-94]
Dynamic loading Experimental study and regression analysis of free and die forming of circular metallic plates using gas mixture explosion [Volume 17, Issue 2, 2021, Pages 85-99]
Dynamic Optimization The Moving Mass Actuated Projectile Attitude Control and Estimation Using a Predictive Controller and Estimator Based on the Particle Filter [Volume 17, Issue 3, 2021, Pages 45-56]
Dynamic Performance Using the Lateral Tire Force to Maneuverability Increment of a Three-wheeled Vehicle During Critical Conditions [Volume 18, Issue 4, 2022, Pages 163-179]
Dynamic pressure The Experimental Study of the Effect of a Diaphragm Thickness on the Position of Planar Shock Wave Formation in a Gas Shock Tube [Volume 15, Issue 4, 2019, Pages 83-94]
Dynamic relaxation [Volume 14, Issue 1, 2018, Pages 97-111]
Dynamic response The Experimental and Analytical Response of Circular Metal Sandwich Panels with Tubular Cores under Blast Load [Volume 17, Issue 4, 2021, Pages 81-95]
Dynamic spherical cavity expansion Investigating the Penetration and Fragmentation of the PELE Projectile using the Methods of Dynamic Expansion of the Spherical Cavity and the Shock Wave [(Articles in Press)]

E

ECAP pipe Finite Element and Experimental Investigation of Aluminum Tube by Equal Channel Angular Pressing [Volume 15, Issue 2, 2019, Pages 131-144]
Eccentric hole [Volume 14, Issue 4, 2018, Pages 51-59]
Eccentricity Load Effect on the Perturbed Oscillation Damping Ability of an Unbalanced Rotor in Three Lobe Bearings [Volume 16, Issue 3, 2020, Pages 35-48]
Elastic foundation [Volume 14, Issue 1, 2018, Pages 11-26]
Elastic foundation Investigation of Functionally Graded Carbon Nanotube Distribution Effect on the Frequency of Annular Sector Plates on Pasternak Elastic Foundation [Volume 15, Issue 1, 2019, Pages 89-106]
Elastic foundation Analysis of Free Vibrations of Functionally Graded Porous Beams on Elastic Foundation in Thermal Environment Using Differential Quadrature Method [Volume 18, Issue 1, 2022, Pages 183-199]
Elasticity Modulus Analytical Analysis for Free Vibration of Different Arrangements of BNNTs under Initially Stress [Volume 15, Issue 3, 2019, Pages 33-46]
Elastic modulus Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
Electrochemical Impedance Spectroscopy Experimental Investigation of the Effect of Cathode Side Liquid Water Accumulation on the Impedance of a Dead Ended Polymer Electrolyte Membrane Fuel Cell by Electrochemical Impedance Spectroscopy Method [Volume 19, Issue 2, 2023, Pages 95-111]
Electro hydraulic servo systems Velocity of Control of Electro Hydraulic Servo System by Using Fuzzy Coupled Method [Volume 15, Issue 1, 2019, Pages 39-50]
Electromagnetic Forming [Volume 14, Issue 2, 2018, Pages 57-66]
Electromagnetic Joint [Volume 14, Issue 2, 2018, Pages 57-66]
Electromagnetic launcher Thermoelastic Analysis of an Electromagnetic Launcher Using Finite Volume Method [Volume 15, Issue 2, 2019, Pages 67-75]
Electro-mechanical Motion System Design of Electromechanical Motion System for an Aircraft Flight Simulator [Volume 15, Issue 3, 2019, Pages 61-77]
Emergency Condition Motion Trajectory Control and Robust Control Based on Nonlinear Bicycle Model to Stabilization for In-wheel Motor Electric Vehicle in Emergency Scenario [Volume 20, Issue 1, 2024, Pages 109-124]
Empirical model The Behavior of Quadrangular Plates under Impulsive Loading: a Dimensional Analysis [Volume 16, Issue 4, 2020, Pages 85-99]
Empirical modeling The Prediction of Center of Mass Displacement of Triangular Plate Using Non-dimensional Analysis [Volume 18, Issue 4, 2022, Pages 17-27]
Empirical results Exergy Analysis of a Gas to Liquid Compact Heat Exchanger as an Intercooler in Various Working Conditions [Volume 16, Issue 3, 2020, Pages 85-98]
End-effector The Design of a Force Control System Simulator for a General-Purpose Robot Using the Simulink Software [Volume 16, Issue 4, 2020, Pages 101-106]
Energy Absorption Investigating the Energy Absorption Parameters of Steel Cylindrical Shells Filled with Polyethylene Subjected to Quasi-static Loading [Volume 18, Issue 4, 2022, Pages 65-76]
Energy Absorption Experimental Study of the Impact of Interlayer Elastomeric Foam on Failure Pattern of Composite Laminated Panels with Various Layups [Volume 19, Issue 3, 2023, Pages 1-15]
Energy Absorption Experimental Investigation of High Velocity Projectile Penetration into Innegra Fabric Composite [Volume 20, Issue 1, 2024, Pages 125-141]
Energy harvesting Energy Harvesting from Nonlinear Vibrating System Using Two Impacting Cantilever Beam [Volume 15, Issue 1, 2019, Pages 75-88]
Energy harvesting The Width Reduction Effect of a Piezoelectric Energy Harvesting Composite Beam on Output Power: An Experimental and Analytical Study [Volume 17, Issue 3, 2021, Pages 71-83]
Energy method Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
Energy Scavenging Composite The Width Reduction Effect of a Piezoelectric Energy Harvesting Composite Beam on Output Power: An Experimental and Analytical Study [Volume 17, Issue 3, 2021, Pages 71-83]
Entropy generation Numerical Evaluation via Lattice Boltzmann Method to Analyze of Entropy Generation due to Conjugate Mixed Convection Heat Transfer of Non-Newtonian Nanofluid under the Influence of Magnetic Field [Volume 19, Issue 2, 2023, Pages 113-129]
Entropy Production Analysis of Entropy and Heat Transfer of Non-Newtonian Ferrofluid Under the Effect of Various External and Internal Factors [Volume 20, Issue 1, 2024, Pages 1-25]
Environmental test Preventing Unwanted Vibrations in the Environmental Test of Random Vibrations of a Spacecraft by Power Spectrum Density Notching [Volume 19, Issue 1, 2023, Pages 17-28]
Erosion Thermodynamic Simulation of Fouling and Erosion in an Industrial Gas Turbine for Power Generation Applications [Volume 19, Issue 4, 2023, Pages 53-69]
Exergy Performance Improvement of the Solar Heat Pump Using Carbon Nanotubes in the Refrigerant and its Condenser Structure [Volume 16, Issue 3, 2020, Pages 75-84]
Exergy Analysis Exergy Analysis of a Gas to Liquid Compact Heat Exchanger as an Intercooler in Various Working Conditions [Volume 16, Issue 3, 2020, Pages 85-98]
Experimental Data Detecting a defective pin through the image processing in the production line [Volume 16, Issue 2, 2020, Pages 87-96]
Experimental implementation Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
Experimental Investigation Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
Experimental Investigation Experimental Investigation of the Effect of Cathode Side Liquid Water Accumulation on the Impedance of a Dead Ended Polymer Electrolyte Membrane Fuel Cell by Electrochemical Impedance Spectroscopy Method [Volume 19, Issue 2, 2023, Pages 95-111]
Experimental study Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
Experimental Test Experimental study and regression analysis of free and die forming of circular metallic plates using gas mixture explosion [Volume 17, Issue 2, 2021, Pages 85-99]
Experimental Work The Width Reduction Effect of a Piezoelectric Energy Harvesting Composite Beam on Output Power: An Experimental and Analytical Study [Volume 17, Issue 3, 2021, Pages 71-83]
Explosion Load The Experimental and Analytical Response of Circular Metal Sandwich Panels with Tubular Cores under Blast Load [Volume 17, Issue 4, 2021, Pages 81-95]
Extended Kalman Filter Accurate Navigation of Marine Vessel, Using the Integration of Inertial Navigation System (INS) and Global Positioning System (GPS), Applying Extended Kalman Filter [Volume 15, Issue 1, 2019, Pages 153-165]
Extended Kalman Filter A Model-Aided Inertial Navigation System for the Remus 100 AUV [Volume 17, Issue 3, 2021, Pages 57-70]
Extended State Observer Robust Nonlinear Autopilot Design Based on Feedback Linearization and Extended State Observers for Interceptors [Volume 17, Issue 2, 2021, Pages 1-12]
Extended State Observer Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
Extended State Observer Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
External disturbance Finite Time Adaptive Sliding Mode Control of Multi-agent Systems via Unknown External Disturbance and Undirected Network [Volume 19, Issue 3, 2023, Pages 137-148]
Extruder temperature Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]

F

Failure lines pattern Experimental Study of the Impact of Interlayer Elastomeric Foam on Failure Pattern of Composite Laminated Panels with Various Layups [Volume 19, Issue 3, 2023, Pages 1-15]
Fatigue analysis Design and Simulatuion of a Hybrid Nano Piezoelectric Resistive-Capacitive Accelerometer Sensor [Volume 15, Issue 4, 2019, Pages 67-82]
Fatigue life estimation Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
Fatigue Test Implementation of Adaptive and Proportional-Integral Algorithms in Servo Hydraulic Fatigue Testing Machines [Volume 12, Issue 4, 2016, Pages 1-9]
Fatigue Testing Machine Implementation of Adaptive and Proportional-Integral Algorithms in Servo Hydraulic Fatigue Testing Machines [Volume 12, Issue 4, 2016, Pages 1-9]
Fault detection Fault-Tolerant Optimal Attitude Tracking Control of Quadrotor Subject to State and Input Constraints Using Safe Reinforcement Learning [Volume 20, Issue 1, 2024, Pages 143-162]
Fault tolerant control Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]
Fault-tolerant optimal control Fault-Tolerant Optimal Attitude Tracking Control of Quadrotor Subject to State and Input Constraints Using Safe Reinforcement Learning [Volume 20, Issue 1, 2024, Pages 143-162]
FCU Simulation of Fuel Mechanical Control Unit for a Turbojet Engine [Volume 15, Issue 2, 2019, Pages 33-42]
FDM parameters Investigation of the Effect of FDM 3D Printing Parameters on Conical Shape Recovery in the 4D Printing Process [Volume 18, Issue 4, 2022, Pages 133-146]
FDM Process Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
Feature Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Feedback Error Learning Velocity of Control of Electro Hydraulic Servo System by Using Fuzzy Coupled Method [Volume 15, Issue 1, 2019, Pages 39-50]
Feedback Linearization Robust Nonlinear Autopilot Design Based on Feedback Linearization and Extended State Observers for Interceptors [Volume 17, Issue 2, 2021, Pages 1-12]
Feedback Linearized Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control [Volume 19, Issue 4, 2023, Pages 41-52]
Feedstock 316L The Numerical and Experimental Investigations of Injection Mold Filling and Determination of the Appropriate Conditions in Metal Injection Molding (MIM) [Volume 17, Issue 3, 2021, Pages 97-112]
Female die Female Die Forming of Metallic Plates using Repeated Underwater Explosions [(Articles in Press)]
FGM [Volume 14, Issue 1, 2018, Pages 11-26]
FGM Free and forced vibration of rotating FGM beam with piezoelectric layer [Volume 16, Issue 1, 2020, Pages 1-13]
FGM Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
Fiber-Metal Laminated Plates Investigation of Lamb Waves Propagation in Variable Stiffness Fiber Metal Laminated Plates Using Finite Element Method [Volume 19, Issue 1, 2023, Pages 81-92]
Filament collection speed Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]
Film-cooling Numerical Analysis of Film-Cooling over the Rotating Turbine Blade Using Laterally-Diffused Hole [Volume 14, Issue 3, 2018, Pages 41-54]
Film Cooling Numerical Investigation Effect of Film cooling with Mixed Heat Transfer in Wall Temperature of LRE Thrust Chamber [Volume 14, Issue 3, 2018, Pages 71-82]
Finite Element [Volume 14, Issue 2, 2018, Pages 89-99]
Finite Element [Volume 14, Issue 1, 2018, Pages 81-96]
Finite Element Analysis of Thermal Stress Distribution Sensitivity in a Planar Solid Oxide Fuel Cell [Volume 16, Issue 4, 2020, Pages 25-37]
Finite Element Stable Inversion for Feedforward Control of Flexible Cooperative Manipulators [Volume 19, Issue 1, 2023, Pages 123-135]
Finite Element Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
Finite Element Method [Volume 14, Issue 1, 2018, Pages 39-54]
Finite Element Method Investigation of Lamb Waves Propagation in Variable Stiffness Fiber Metal Laminated Plates Using Finite Element Method [Volume 19, Issue 1, 2023, Pages 81-92]
Finite element model Finite element investigation of multiple solid particle erosion of Al 7075-T6 and Ti-6Al-4V alloys [Volume 16, Issue 4, 2020, Pages 13-24]
Finite Element Simulation Finite Element Analysis of Formability Improvement of Aluminum Alloy AA5182-O in Warm Electrohydraulic Forming Process [Volume 15, Issue 2, 2019, Pages 91-102]
Finite Element Simulation Finite Element and Experimental Investigation of Aluminum Tube by Equal Channel Angular Pressing [Volume 15, Issue 2, 2019, Pages 131-144]
Finite Similitude Design of a Scaled Framework for Perforation Behavior Analysis of Red Blood Cell Membrane Subjected to Impact Loading by Nanoparticle [Volume 20, Issue 1, 2024, Pages 163-179]
Finite time stabilization Finite Time Adaptive Sliding Mode Control of Multi-agent Systems via Unknown External Disturbance and Undirected Network [Volume 19, Issue 3, 2023, Pages 137-148]
Fin tube Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
First Layer Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
First order Shear Deformation Plate Theory Analytical Solution for Buckling of Annular Sectorial Porous Plates [Volume 15, Issue 1, 2019, Pages 137-152]
First order shear deformation theory Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
First order shear deformation theory Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
First order shear deformation theory Thermal Buckling and Postbuckling Analysis of Plates Reinforced with Graphene Platelets Using Differential Quadrature Method [Volume 19, Issue 4, 2023, Pages 103-117]
First-order shear deformation Theory Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
Fixed & Moving Obstacles In this paper, tracking control of unmanned surface vessels by using the robust mode sliding control in the presence of fixed and moving obstacles are investigated. The mathematical model of vessels is in three degree of freedom (3DOF) and only contains the kinematics and dynamics of relevant to surge, sway and yaw. These vessels are controlled in under actuated manner; although they have (3DOF), but only are equipped [Volume 13, Issue 4, 2017, Pages 11-19]
Flat and Curved Steel Sheets Studies on the effect of reinforcers types on flat and curved steel sheets’ performance under drop impact [Volume 16, Issue 4, 2020, Pages 39-59]
Flexible joint Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
Flexible Manipulator Stable Inversion for Feedforward Control of Flexible Cooperative Manipulators [Volume 19, Issue 1, 2023, Pages 123-135]
Flexible spacecraft Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]
Flexible spacecraft Applying Robust Quasi-Sliding Mode Approach for Attitude Control of a Flexible Spacecraft [Volume 19, Issue 3, 2023, Pages 97-108]
Flexible Support Thermoelastic Analysis of an Electromagnetic Launcher Using Finite Volume Method [Volume 15, Issue 2, 2019, Pages 67-75]
Flexible viscoelastic composite plate [Volume 14, Issue 1, 2018, Pages 81-96]
Flexoelectric nanotube carrying fluid Nonlinear Response and Stability of Flexoelectric Nanotube Conveying Fluid under Temperature Field using Nonlocal Strain Gradient Theory [Volume 18, Issue 1, 2022, Pages 21-39]
Flight Control System Application and Evaluation of Laguerre Functions in Helicopter Flight Control System Designed by Model Predictive Control [Volume 15, Issue 1, 2019, Pages 25-38]
Flight Performance [Volume 14, Issue 4, 2018, Pages 91-100]
Flight simulator [Volume 14, Issue 4, 2018, Pages 33-50]
Flocking Flocking of Quadcopter Robots Observing Safety Distance [Volume 19, Issue 3, 2023, Pages 17-32]
Flow Field Numerical Analysis of Aerodynamic Interference of Two Passing Cylindrical Bodies at Supersonic Speeds [Volume 19, Issue 3, 2023, Pages 79-95]
Fluid-Induced Vibration Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
Flutter Static and Dynamic Stability Analysis of Pipes Conveying Fluid with Different Boundary Conditions [Volume 17, Issue 1, 2021, Pages 1-10]
Flying Boat Designing of a Flying Boat Height Holder Based of the Fuzzy Controller [Volume 12, Issue 4, 2016, Pages 11-23]
Force Control Implementation of Adaptive and Proportional-Integral Algorithms in Servo Hydraulic Fatigue Testing Machines [Volume 12, Issue 4, 2016, Pages 1-9]
Force Control The Design of a Force Control System Simulator for a General-Purpose Robot Using the Simulink Software [Volume 16, Issue 4, 2020, Pages 101-106]
Force Control Hybrid Position/Force Control of the Macro/Micro Manipulator for Assembly of PCB Utilizing Fuzzy Control [Volume 17, Issue 2, 2021, Pages 117-128]
Forced Vibration [Volume 13, Issue 4, 2017, Pages 21-34]
Forced Vibration [Volume 13, Issue 4, 2017, Pages 71-87]
Formability Finite Element Analysis of Formability Improvement of Aluminum Alloy AA5182-O in Warm Electrohydraulic Forming Process [Volume 15, Issue 2, 2019, Pages 91-102]
Formation control Formation Control of Flying Robots Using Constrained Model Predictive Control While Tracking of Moving Target in Presence of Obstacles [Volume 18, Issue 4, 2022, Pages 29-47]
Formation control Optimal Formation Control for Unmanned Aerial Vehicle Teams with Collision Avoidance Constraint and Unknown Dynamics [Volume 19, Issue 1, 2023, Pages 61-79]
Fouling Thermodynamic Simulation of Fouling and Erosion in an Industrial Gas Turbine for Power Generation Applications [Volume 19, Issue 4, 2023, Pages 53-69]
Fractional order controller The Design of a Fractional-order Predictive Functional Controller for the Magnetic Levitation System [Volume 16, Issue 4, 2020, Pages 1-12]
Fracture Mechanics Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
Fracture Mechanics Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
Fracture Toughness Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
Free gyro inertial measurement unit Design and Construction of Free Gyro IMU Using MEMS Accelerometers [Volume 15, Issue 1, 2019, Pages 63-74]
Frequency Modeling the Oscillatory Behavior of Carbon Nano-onions Inside Single-walled Carbon Nanotubes Based on the Continuum Approximation Method [Volume 19, Issue 4, 2023, Pages 135-148]
Frequency Response Nonlinear Vibration Analysis of a Composite Cylindrical Shell on a Viscoelastic Foundation and under Subsonic External Air Flow [Volume 15, Issue 3, 2019, Pages 127-139]
Frictional stir processing Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
Frictional work Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
Friction factor Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
Friction identification Estimation of the Payload mass in DELTA robot by using the motor torque [Volume 16, Issue 2, 2020, Pages 27-38]
Friction stir processing Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
Friction Stir Welding The Multi-Objective Optimization of the Friction Stir Welding using the Taguchi Design Method, the Response Surface Model and the Particle Swarm Algorithm [Volume 17, Issue 4, 2021, Pages 39-54]
FSDT Free and forced vibration of rotating FGM beam with piezoelectric layer [Volume 16, Issue 1, 2020, Pages 1-13]
Fuctionally Graded Material [Volume 13, Issue 4, 2017, Pages 71-87]
Fuel Control Design and Implementation of Model Predictive Controller for Turbofan Engine Fuel Control [Volume 15, Issue 1, 2019, Pages 1-12]
Full-Spectrum k-Distribution Model The Combination of Discrete Ordinates and Full-Spectrum k-Distribution Methods to Analysis of Radiative-Conductive Heat Transfer in a Two Dimensional Enclosure [Volume 17, Issue 1, 2021, Pages 51-67]
Functionalization A Molecular Dynamics Study on the Buckling Analysis of Functionalized Graphene with Nylon 6,6 in Aqueous Environment [Volume 19, Issue 4, 2023, Pages 1-10]
Functionally graded material Free Vibration Analysis Of Thick Functionally Graded Rotating Beam By Differential Transform Method [Volume 12, Issue 4, 2016, Pages 49-61]
Functionally graded material Analysis of Heat Conduction in a Quadratic Functionally Graded Plane by Boundary Element Method Based on the Variable Transmission Approach [Volume 15, Issue 2, 2019, Pages 77-89]
Functionally graded material Vibrations of a Rotating Functionally Graded Cylindrical Shell under Pressure with Ring and Stringer Stiffened [Volume 15, Issue 4, 2019, Pages 1-14]
Functionally graded material Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
Functionally graded materials Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
Functionally Graded Piezoelectric Plate [Volume 13, Issue 4, 2017, Pages 35-46]
Functionally Graded Porous Beams Analysis of Free Vibrations of Functionally Graded Porous Beams on Elastic Foundation in Thermal Environment Using Differential Quadrature Method [Volume 18, Issue 1, 2022, Pages 183-199]
Fused Deposition Modeling Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
Fuzzy Approach Design and Implementation of a Centralized Predictive Model Estimation Algorithm with the Fuzzy Approach for In-Motion Alignment of a Low-cost Integrated INS/GPS Inertial Navigation System [Volume 17, Issue 4, 2021, Pages 1-14]
Fuzzy approximator Fuzzy Robust Backstepping Control Design for Control of Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 15, Issue 1, 2019, Pages 123-135]
Fuzzy clustering Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Fuzzy C-Means Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Fuzzy control Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control [Volume 19, Issue 4, 2023, Pages 11-26]
Fuzzy Controller Velocity of Control of Electro Hydraulic Servo System by Using Fuzzy Coupled Method [Volume 15, Issue 1, 2019, Pages 39-50]
Fuzzy Controller Hybrid Position/Force Control of the Macro/Micro Manipulator for Assembly of PCB Utilizing Fuzzy Control [Volume 17, Issue 2, 2021, Pages 117-128]
Fuzzy Controllers Designing of a Flying Boat Height Holder Based of the Fuzzy Controller [Volume 12, Issue 4, 2016, Pages 11-23]
Fuzzy Logic Multidisciplinary Design Optimization of an Unmanned Air Vehicle and Final Solution Selection Based on Fuzzy Satisfaction Degree Function [Volume 15, Issue 1, 2019, Pages 107-122]
Fuzzy Logic Control Allocation Based on Fuzzy Approach for Landing Phase of Specific Aircraft [Volume 19, Issue 2, 2023, Pages 1-10]
Fuzzy-PID controller Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
Fuzzy System The Design and Comparison of Backstepping Fuzzy Control and Fuzzy Sliding Mode Control for Controlling Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 17, Issue 3, 2021, Pages 17-36]
Fuzzy System Flocking of Quadcopter Robots Observing Safety Distance [Volume 19, Issue 3, 2023, Pages 17-32]

G

Gain-Scheduling Adaptive Gian Scheduling Strategies for Aircraft Longitudinal Maneuvers Control [Volume 15, Issue 4, 2019, Pages 30-48]
Galerkin method Investigation of Transient Nonlinear Response of Fiber Metal Laminates (FML’s) under Uniform Time-dependent Pressure Loading [Volume 18, Issue 3, 2022, Pages 109-125]
Gaseous detonation Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
Gaseous detonation Numerical Simulation of Triangular Plate Deformation Profile Under Gaseous Detonation Loading [Volume 19, Issue 1, 2023, Pages 1-15]
Gas Turbine Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
Gas Turbine Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
GAX cycle Thermodynamic and exergoeconomic analysis and optimization of a Standard ammonia-water generator-absorber heat exchange (GAX) based absorption refrigeration cycle [Volume 16, Issue 3, 2020, Pages 21-34]
Generalized &alpha Stable Inversion for Feedforward Control of Flexible Cooperative Manipulators [Volume 19, Issue 1, 2023, Pages 123-135]
Generalized Forming Limit Diagram Determination of Failure in Single Point Incremental Forming using Generalized Forming Limit Diagram [(Articles in Press)]
Genetic Algorithm method Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]
Geometric parameters Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]
Geostationary Orbit Investigation of the LEO Transfer Orbit to GEO Using Lagrangian Points of the Earth-Sun System in the Presence of Perturbations [Volume 15, Issue 4, 2019, Pages 109-120]
Glass/Vinyl ester composites Experimental Study of the Impact of Interlayer Elastomeric Foam on Failure Pattern of Composite Laminated Panels with Various Layups [Volume 19, Issue 3, 2023, Pages 1-15]
Global Positioning System (GPS) Design and Implementation of a Centralized Predictive Model Estimation Algorithm with the Fuzzy Approach for In-Motion Alignment of a Low-cost Integrated INS/GPS Inertial Navigation System [Volume 17, Issue 4, 2021, Pages 1-14]
Gouging [Volume 14, Issue 2, 2018, Pages 67-80]
GPS Accurate Navigation of Marine Vessel, Using the Integration of Inertial Navigation System (INS) and Global Positioning System (GPS), Applying Extended Kalman Filter [Volume 15, Issue 1, 2019, Pages 153-165]
Graghene platelets Thermal Buckling and Postbuckling Analysis of Plates Reinforced with Graphene Platelets Using Differential Quadrature Method [Volume 19, Issue 4, 2023, Pages 103-117]
Graphene [Volume 14, Issue 4, 2018, Pages 51-59]
Graphene A Molecular Dynamics Study on the Buckling Analysis of Functionalized Graphene with Nylon 6,6 in Aqueous Environment [Volume 19, Issue 4, 2023, Pages 1-10]
Gravity Gradient Torque [Volume 13, Issue 4, 2017, Pages 47-58]
GT-Power Model Parametric study on the performance of a gasoline turbocharged aircraft engine at high altitudes using a one-dimensional model [Volume 16, Issue 1, 2020, Pages 67-82]
Guidance and Control Behavioral Guidance and Control of a Flying Robot for Leader-Follower Concept [Volume 15, Issue 1, 2019, Pages 13-24]
Guidance and Control Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control [Volume 19, Issue 4, 2023, Pages 11-26]
GWP Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]
Gyroscope [Volume 14, Issue 4, 2018, Pages 75-89]
Gyroscope Accurate Navigation of Marine Vessel, Using the Integration of Inertial Navigation System (INS) and Global Positioning System (GPS), Applying Extended Kalman Filter [Volume 15, Issue 1, 2019, Pages 153-165]
Gyroscope Data Fusion of Gyroscope and Magnetometer to Estimate the Attitude of High-Speed Projectiles Based on Particle Filter and PSO [Volume 16, Issue 1, 2020, Pages 15-30]

H

Half car model The Design of a Seat Controller for the Half Car Model in Various Vibrating Conditions Using the Seated Human Body Situation [Volume 17, Issue 4, 2021, Pages 29-38]
Halpin–Tsai [Volume 14, Issue 1, 2018, Pages 65-80]
Hancock Flutter Control of a Quasi-three-dimensional Wing in Simplified Unsteady Flow using Forced Jet [Volume 20, Issue 1, 2024, Pages 45-58]
Handling Using the Lateral Tire Force to Maneuverability Increment of a Three-wheeled Vehicle During Critical Conditions [Volume 18, Issue 4, 2022, Pages 163-179]
Hankel transform Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
Hardware in loop Design and Experimental Implementation of Adaptive Actuator Failure Compensator for Spacecraft Attitude Control Simulator [Volume 20, Issue 1, 2024, Pages 27-43]
Hardware-in-the-Loop Design and Implementation of Model Predictive Controller for Turbofan Engine Fuel Control [Volume 15, Issue 1, 2019, Pages 1-12]
Hardware-in the-loop Lab Constrained Optimal Controller Design for a Flight Vehicle Based on Predictive Control Approach and its Implementation in the Hardware in the Loop Lab [Volume 15, Issue 3, 2019, Pages 79-92]
Harmonic base excitation Energy Harvesting from Nonlinear Vibrating System Using Two Impacting Cantilever Beam [Volume 15, Issue 1, 2019, Pages 75-88]
Harmony search algorithm Design of a Sliding Mode Controller with Optimal Parameters for Three-Dimensional Guidance Law Using Harmony Search Algorithm [Volume 16, Issue 1, 2020, Pages 31-38]
Hartmann number Investigation of Laminar and Turbulent of Natural Convection of Nanofluid in a Trapezoidal Enclosure under the Influence of Magnetic Field [Volume 15, Issue 2, 2019, Pages 53-66]
Heat conduction analysis Analysis of Heat Conduction in a Quadratic Functionally Graded Plane by Boundary Element Method Based on the Variable Transmission Approach [Volume 15, Issue 2, 2019, Pages 77-89]
Heat management Improving Performance and Decreasing of Cooling System Volume in Low Temperature PEM Fuel Cell Using Nanofluid [Volume 15, Issue 2, 2019, Pages 1-16]
Heat pipe Experimental Investigation and Numerical Simulation of Thermosyphon Heat Pipe under High Temperature Operation Conditions [Volume 15, Issue 2, 2019, Pages 43-52]
Heat Transfer Modeling of Gas Turbine Combustion Chamber; By Using Network Method [Volume 14, Issue 3, 2018, Pages 1-17]
Heat Transfer Numerical Investigation Effect of Film cooling with Mixed Heat Transfer in Wall Temperature of LRE Thrust Chamber [Volume 14, Issue 3, 2018, Pages 71-82]
Heat Transfer Perturbation Analysis Of Heat Transfer in Porous Media with Small Thermal Conductivity [Volume 14, Issue 3, 2018, Pages 83-93]
Heat Transfer Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
Heat Transfer Numerical Simulation of the Effect of Using a Finned Tube on the Thermal Efficiency of Heat Exchangers [Volume 18, Issue 1, 2022, Pages 53-76]
Heat transfer augmentation Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade [Volume 14, Issue 3, 2018, Pages 19-28]
Height Holder Designing of a Flying Boat Height Holder Based of the Fuzzy Controller [Volume 12, Issue 4, 2016, Pages 11-23]
Helical Tool-Path generation [Volume 14, Issue 2, 2018, Pages 67-80]
Helicopter Application and Evaluation of Laguerre Functions in Helicopter Flight Control System Designed by Model Predictive Control [Volume 15, Issue 1, 2019, Pages 25-38]
Heuristic guidance algorithm A Model of Predictive Terminal Guidance Based on Whale Optimization Algorithm Considering the Aerodynamic Model of the Pursuer [Volume 17, Issue 1, 2021, Pages 37-50]
High Altitude Parametric study on the performance of a gasoline turbocharged aircraft engine at high altitudes using a one-dimensional model [Volume 16, Issue 1, 2020, Pages 67-82]
Higher-Order Shear and Normal Deformable [Volume 13, Issue 4, 2017, Pages 35-46]
Higher-order Shear and Normal Deformable Theory [Volume 13, Issue 4, 2017, Pages 71-87]
Highest Laser Powers Optimization of Copper Mirrors Polishing Parameters by Chemical-Mechanical Method [Volume 15, Issue 3, 2019, Pages 119-126]
Honeycomb sandwich structure Optimization of Effective Parameters on the Bending Behavior of Honeycomb Sandwich Panels Using Response Surface Method [Volume 19, Issue 3, 2023, Pages 61-78]
Horizontal Misalignment A Novel Approach for Estimating the Initial Alignment of INS based on the Kalman Filter and an Estimator with Unknown Input [Volume 17, Issue 1, 2021, Pages 1-11]
Hot Tube Gas Forming [Volume 14, Issue 2, 2018, Pages 89-99]
Hover Maneuver Application and Evaluation of Laguerre Functions in Helicopter Flight Control System Designed by Model Predictive Control [Volume 15, Issue 1, 2019, Pages 25-38]
HSM [Volume 14, Issue 2, 2018, Pages 67-80]
Hybrid Composite Laminate The Experimental and Numerical Investigation of Non-Symmetric Bi-Stability in Hybrid Composite Plates for Application in Adaptive Structures [Volume 17, Issue 4, 2021, Pages 15-27]
Hybrid joint Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
Hybrid nanofluids Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
Hybrid nanofluids Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
Hygrothermal environments [Volume 14, Issue 1, 2018, Pages 65-80]
Hyperbolic Beam Theory Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
Hyper-Elastic Constitutive Equations Design of a Scaled Framework for Perforation Behavior Analysis of Red Blood Cell Membrane Subjected to Impact Loading by Nanoparticle [Volume 20, Issue 1, 2024, Pages 163-179]

I

IGT25 industrial gas turbine Thermodynamic Simulation of Fouling and Erosion in an Industrial Gas Turbine for Power Generation Applications [Volume 19, Issue 4, 2023, Pages 53-69]
Image Processing Detecting a defective pin through the image processing in the production line [Volume 16, Issue 2, 2020, Pages 87-96]
Image Processing Diagnosis of Diesel Engine Based on Oil Analysis Using Convolutional Neural Network and Visualization [Volume 19, Issue 3, 2023, Pages 123-136]
Immersed Boundary Method Numerical Simulation of Triangular Plate Deformation Profile Under Gaseous Detonation Loading [Volume 19, Issue 1, 2023, Pages 1-15]
Impact Studies on the effect of reinforcers types on flat and curved steel sheets’ performance under drop impact [Volume 16, Issue 4, 2020, Pages 39-59]
Impact Analytical Modeling of Impact loading of Nanoparticles on the Nano-curved Plate [Volume 17, Issue 1, 2021, Pages 69-81]
Impact Strength Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]
Improved complementary filter Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
Impulsive loading Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
Incremental Predictive Filter Proposing a New Approach to Increase the Accuracy of the GPS / INS Integration System Based on an Incremental Predictive Filter During GPS Outage and it's Implementation in the Laboratory [Volume 17, Issue 4, 2021, Pages 97-108]
Inertial Navigation [Volume 14, Issue 4, 2018, Pages 75-89]
Inertial Navigation Accurate Navigation of Marine Vessel, Using the Integration of Inertial Navigation System (INS) and Global Positioning System (GPS), Applying Extended Kalman Filter [Volume 15, Issue 1, 2019, Pages 153-165]
Inertial Navigation Error Rate Reduction of a Low-Cost Integrated Navigation System Using Neural Networks [Volume 15, Issue 3, 2019, Pages 17-32]
Inertial Navigation A Novel Approach for Estimating the Initial Alignment of INS based on the Kalman Filter and an Estimator with Unknown Input [Volume 17, Issue 1, 2021, Pages 1-11]
Inertial Navigation Implementation of GPS / INS Fusion Algorithm Using GPS Pseudo-Range [Volume 18, Issue 4, 2022, Pages 105-118]
Inertial Navigation System Proposing a New Approach to Increase the Accuracy of the GPS / INS Integration System Based on an Incremental Predictive Filter During GPS Outage and it's Implementation in the Laboratory [Volume 17, Issue 4, 2021, Pages 97-108]
Inertial Navigation System (INS) Design and Implementation of a Centralized Predictive Model Estimation Algorithm with the Fuzzy Approach for In-Motion Alignment of a Low-cost Integrated INS/GPS Inertial Navigation System [Volume 17, Issue 4, 2021, Pages 1-14]
Information Sharing A Guidance law for interception of very high-speed targets using a simulator-based learning algorithm [Volume 16, Issue 3, 2020, Pages 49-57]
Initial Alignment A Novel Approach for Estimating the Initial Alignment of INS based on the Kalman Filter and an Estimator with Unknown Input [Volume 17, Issue 1, 2021, Pages 1-11]
Initial Distance Experimental Analysis of the Effect of Compressive Force Resulting from the Initial Distance on the Improvement of Dimensional Accuracy Using Fluorinated Ethylene Propylene Membranes with Different Thicknesses in Digital Light Processing Method [Volume 19, Issue 2, 2023, Pages 57-68]
Initial Stress Analytical Analysis for Free Vibration of Different Arrangements of BNNTs under Initially Stress [Volume 15, Issue 3, 2019, Pages 33-46]
In-Motion Alignment Design and Implementation of a Centralized Predictive Model Estimation Algorithm with the Fuzzy Approach for In-Motion Alignment of a Low-cost Integrated INS/GPS Inertial Navigation System [Volume 17, Issue 4, 2021, Pages 1-14]
Innegra/Epoxy Woven Composite Experimental Investigation of High Velocity Projectile Penetration into Innegra Fabric Composite [Volume 20, Issue 1, 2024, Pages 125-141]
Input Constraint Constrained Optimal Controller Design for a Flight Vehicle Based on Predictive Control Approach and its Implementation in the Hardware in the Loop Lab [Volume 15, Issue 3, 2019, Pages 79-92]
Integral sliding mode control Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]
Integrated Guidance and Control Optimal Reentry Guidance using a Combined Method [Volume 12, Issue 4, 2016, Pages 35-48]
Integrated navigation system Error Rate Reduction of a Low-Cost Integrated Navigation System Using Neural Networks [Volume 15, Issue 3, 2019, Pages 17-32]
Integrated navigation system Proposing a New Approach to Increase the Accuracy of the GPS / INS Integration System Based on an Incremental Predictive Filter During GPS Outage and it's Implementation in the Laboratory [Volume 17, Issue 4, 2021, Pages 97-108]
Integrated vehicle dynamics control A New Steering and Braking Control Strategy for Tractor Semi-Trailer Truck During a Critical Lane Change Maneuver [Volume 20, Issue 1, 2024, Pages 59-75]
Interfacial shear strength Investigating the Effect of Extruder Temperature and Filament Collection Speed on the Impregnation Quality of PLA Filament Reinforced with Continuous Carbon Fibers [Volume 19, Issue 3, 2023, Pages 47-59]
Interlaminar Mixed-Mode Fracture [Volume 14, Issue 1, 2018, Pages 39-54]
Interlayer elastomeric foam Experimental Study of the Impact of Interlayer Elastomeric Foam on Failure Pattern of Composite Laminated Panels with Various Layups [Volume 19, Issue 3, 2023, Pages 1-15]
Internal detonation The Prediction of Center of Mass Displacement of Triangular Plate Using Non-dimensional Analysis [Volume 18, Issue 4, 2022, Pages 17-27]
Internal pressure Nonlinear Vibration analysis of a composite cylindrical shell with internal pressure, subjected to a low velocity impact using analytical and FE methods [Volume 16, Issue 3, 2020, Pages 59-73]
Inverse dynamic [Volume 14, Issue 2, 2018, Pages 1-17]
Inverse Kinematic Problem The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
Inverted pendulum Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
In-wheel Motor Motion Trajectory Control and Robust Control Based on Nonlinear Bicycle Model to Stabilization for In-wheel Motor Electric Vehicle in Emergency Scenario [Volume 20, Issue 1, 2024, Pages 109-124]
Isothermal and Non-Isothermal [Volume 14, Issue 2, 2018, Pages 43-55]

J

Jet Tip Velocity Numerical Analysis of Shaped Charge Bimetallic Liners Effects on Diameter and Depth of Penetration into Steel Targets [Volume 15, Issue 3, 2019, Pages 93-105]
Johnson-Cook model Finite element investigation of multiple solid particle erosion of Al 7075-T6 and Ti-6Al-4V alloys [Volume 16, Issue 4, 2020, Pages 13-24]
Joystick The Design of a Force Control System Simulator for a General-Purpose Robot Using the Simulink Software [Volume 16, Issue 4, 2020, Pages 101-106]
Jump Phenomenon The Study of the Stochastic Jump Phenomenon in a Nonlinear Cantilever Beam Immersed in Water Under Narrow-Band Random Excitation [Volume 17, Issue 3, 2021, Pages 85-95]
Jump Phenomenon Study of Phenomena of Jump and Chaos in a Non-linear Beam with Concentrated Mass Under the Effects of Water Flow [Volume 18, Issue 2, 2022, Pages 157-167]

K

Kalman Filter [Volume 14, Issue 4, 2018, Pages 75-89]
Kalman Filter Error Rate Reduction of a Low-Cost Integrated Navigation System Using Neural Networks [Volume 15, Issue 3, 2019, Pages 17-32]
Kalman Filter A Novel Approach for Estimating the Initial Alignment of INS based on the Kalman Filter and an Estimator with Unknown Input [Volume 17, Issue 1, 2021, Pages 1-11]
Kalman Filter Implementation of GPS / INS Fusion Algorithm Using GPS Pseudo-Range [Volume 18, Issue 4, 2022, Pages 105-118]
Keywords: Rocket Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control [Volume 19, Issue 4, 2023, Pages 11-26]
Kinematic Dynamic Analysis of a Novel Spherical Parallel Manipulator on the Moving Base Using the Principle of Virtual Work [Volume 17, Issue 2, 2021, Pages 13-27]
Kinematic analysis [Volume 14, Issue 2, 2018, Pages 1-17]
Kinematics and Dynamics Design of Electromechanical Motion System for an Aircraft Flight Simulator [Volume 15, Issue 3, 2019, Pages 61-77]
KIVA-3V solver Numerical Investigation of a SI-Engine Performance Equipped with a Variable Valve Timing System [Volume 14, Issue 3, 2018, Pages 55-69]
Kurtosis-Entropy Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]

L

Lagrange Method Stable Inversion for Feedforward Control of Flexible Cooperative Manipulators [Volume 19, Issue 1, 2023, Pages 123-135]
Lagrangian method Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
Lagrangian Points of Sun-Earth System Investigation of the LEO Transfer Orbit to GEO Using Lagrangian Points of the Earth-Sun System in the Presence of Perturbations [Volume 15, Issue 4, 2019, Pages 109-120]
Laguerre Functions Application and Evaluation of Laguerre Functions in Helicopter Flight Control System Designed by Model Predictive Control [Volume 15, Issue 1, 2019, Pages 25-38]
Lamb Waves Investigation of Lamb Waves Propagation in Variable Stiffness Fiber Metal Laminated Plates Using Finite Element Method [Volume 19, Issue 1, 2023, Pages 81-92]
Lane Change Maneuver Automated guided of articulated heavy vehicle in traffic situation by sliding-mode controller [Volume 16, Issue 2, 2020, Pages 1-14]
Laplace Transform Perturbation Analysis Of Heat Transfer in Porous Media with Small Thermal Conductivity [Volume 14, Issue 3, 2018, Pages 83-93]
Laplacian matrix Time Varying Formation Control of Unmanned Aerial Vehicle Multi-Agent Systems with Unknown Leader Input [Volume 17, Issue 2, 2021, Pages 53-69]
Laser Detection Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
Laser power The Study of Scan Speed and Laser Power Effects on the Molten Pool in Selective Laser Melting of Ti6Al4V Based on the Molten Motion Equations [Volume 17, Issue 3, 2021, Pages 1-15]
Layered Silicate The Investigation of the Nano-Clay Effects on Thermal Behavior and Ignition Resistance of the Phenolic-Carbon Nanocomposite [Volume 17, Issue 3, 2021, Pages 37-43]
Layerwise theory [Volume 14, Issue 1, 2018, Pages 81-96]
Leader-follower Time Varying Formation Control of Unmanned Aerial Vehicle Multi-Agent Systems with Unknown Leader Input [Volume 17, Issue 2, 2021, Pages 53-69]
Leader-Follower Method [Volume 13, Issue 4, 2017, Pages 59-69]
Leading Edge Detection Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
Lift force Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
Limit Drawing Ratio [Volume 14, Issue 2, 2018, Pages 43-55]
Linear control Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control [Volume 19, Issue 4, 2023, Pages 41-52]
Linearized Inverse Kinematics of Stewart mechanism [Volume 14, Issue 4, 2018, Pages 33-50]
Linear Model Design and Implementation of Model Predictive Controller for Turbofan Engine Fuel Control [Volume 15, Issue 1, 2019, Pages 1-12]
Liquid propellant engine Study on the influence of surface roughness on the performance of regenerative cooling in liquid propellant engine [Volume 16, Issue 3, 2020, Pages 99-105]
Liquid rocket engine Optimizing the Cooling System of an LH2/LOX Rocket Engine using the Bees Algorithm [Volume 19, Issue 3, 2023, Pages 109-121]
Liquid Rocket Engines Numerical Investigation Effect of Film cooling with Mixed Heat Transfer in Wall Temperature of LRE Thrust Chamber [Volume 14, Issue 3, 2018, Pages 71-82]
Liquid Water Accumulation Experimental Investigation of the Effect of Cathode Side Liquid Water Accumulation on the Impedance of a Dead Ended Polymer Electrolyte Membrane Fuel Cell by Electrochemical Impedance Spectroscopy Method [Volume 19, Issue 2, 2023, Pages 95-111]
Load monitoring [Volume 14, Issue 1, 2018, Pages 1-10]
Localized loading The Behavior of Quadrangular Plates under Impulsive Loading: a Dimensional Analysis [Volume 16, Issue 4, 2020, Pages 85-99]
Longitudinal manoeuvring Adaptive Gian Scheduling Strategies for Aircraft Longitudinal Maneuvers Control [Volume 15, Issue 4, 2019, Pages 30-48]
Longitudinal Mode Designing of a Flying Boat Height Holder Based of the Fuzzy Controller [Volume 12, Issue 4, 2016, Pages 11-23]
LOS rate Estimation Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
Loss factor [Volume 14, Issue 4, 2018, Pages 1-19]
Low velocity impact Low Velocity Impact Analysis of Laminated Composite Plates with using modified contact law [Volume 16, Issue 2, 2020, Pages 63-75]
Low velocity impact Nonlinear Vibration analysis of a composite cylindrical shell with internal pressure, subjected to a low velocity impact using analytical and FE methods [Volume 16, Issue 3, 2020, Pages 59-73]
Low-velocity impact [Volume 14, Issue 1, 2018, Pages 81-96]
LQI Controller Model predictive control design for a heavy articulated vehicle during critical lane change maneuver [Volume 16, Issue 2, 2020, Pages 39-53]
LS Estimation Algorithm Design and Construction of Free Gyro IMU Using MEMS Accelerometers [Volume 15, Issue 1, 2019, Pages 63-74]
Lyapanov stability Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
Lyapunov function Robust Adaptive Backstepping Control of Automated Vehicle Convoys in the Presence of Combined Actuator Fault, Parameter Uncertainties, and External Disturbance by Considering Speed Constraints [Volume 19, Issue 4, 2023, Pages 119-133]
Lyapunov Stability Method In this paper, tracking control of unmanned surface vessels by using the robust mode sliding control in the presence of fixed and moving obstacles are investigated. The mathematical model of vessels is in three degree of freedom (3DOF) and only contains the kinematics and dynamics of relevant to surge, sway and yaw. These vessels are controlled in under actuated manner; although they have (3DOF), but only are equipped [Volume 13, Issue 4, 2017, Pages 11-19]
Lyapunov' s Theory Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]

M

Machine Vision [Volume 13, Issue 4, 2017, Pages 89-98]
Macro/Micro Mechanism Hybrid Position/Force Control of the Macro/Micro Manipulator for Assembly of PCB Utilizing Fuzzy Control [Volume 17, Issue 2, 2021, Pages 117-128]
Magnetic Field [Volume 14, Issue 4, 2018, Pages 1-19]
Magnetic Field Investigation of Laminar and Turbulent of Natural Convection of Nanofluid in a Trapezoidal Enclosure under the Influence of Magnetic Field [Volume 15, Issue 2, 2019, Pages 53-66]
Magnetic levitation system The Design of a Fractional-order Predictive Functional Controller for the Magnetic Levitation System [Volume 16, Issue 4, 2020, Pages 1-12]
Magnetometer Data Fusion of Gyroscope and Magnetometer to Estimate the Attitude of High-Speed Projectiles Based on Particle Filter and PSO [Volume 16, Issue 1, 2020, Pages 15-30]
Maneuverability Nonlinear Active Steering Controller for Improvement of Vehicle Lateral Stability [Volume 15, Issue 3, 2019, Pages 47-60]
Mass Flow [Volume 13, Issue 4, 2017, Pages 21-34]
Mass unbalance Load Effect on the Perturbed Oscillation Damping Ability of an Unbalanced Rotor in Three Lobe Bearings [Volume 16, Issue 3, 2020, Pages 35-48]
Matthew-Hill equations A Dynamic Stability Analysis of Composite Grid-Stiffened Cylindrical Shells under Harmonic Loads Using the Donnelly Theory [Volume 17, Issue 4, 2021, Pages 55-79]
Maximum displacement Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
Maximum projectile penetration Optimizing the shape of the penetrator nose into Compressible Concrete in order to achieve the maximum penetration depth [Volume 17, Issue 2, 2021, Pages 101-115]
Measurement noise Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
Mechanical Properties [Volume 14, Issue 1, 2018, Pages 55-64]
Mechanical Properties Optimization of Mechanical Properties of trinary Nanocomposites Based on Polypropylene/Nitrile Rubber /Silica Nano-Powder by Using Response Surface methodology [Volume 15, Issue 3, 2019, Pages 107-117]
Mechanical Properties The Multi-Objective Optimization of the Friction Stir Welding using the Taguchi Design Method, the Response Surface Model and the Particle Swarm Algorithm [Volume 17, Issue 4, 2021, Pages 39-54]
Mechanical Properties Mechanical and Corrosion Behavior of Friction Stir Processed 6061 Aluminum Alloy Reinforced by Alumina Powder [Volume 19, Issue 1, 2023, Pages 45-59]
Mechanism design Implementation of Shape Memory Alloy Spring Behavior in a Mechanism as a Torsional Actuator for Position Changing of Rocket Wing [Volume 17, Issue 1, 2021, Pages 99-114]
MEMS accelerometer Design and Construction of Free Gyro IMU Using MEMS Accelerometers [Volume 15, Issue 1, 2019, Pages 63-74]
MEMS Vibrational Gyroscope Design of a Conntroller for Using MEMS Vibrational Gyroscope System [Volume 15, Issue 3, 2019, Pages 1-16]
Merritt Number Experimental Investigation and Numerical Simulation of Thermosyphon Heat Pipe under High Temperature Operation Conditions [Volume 15, Issue 2, 2019, Pages 43-52]
Meta-Heuristic Algorithms Multi-Sensory Data Fusion System for Tool Condition Monitoring Using Optimized Artificial Fuzzy Inference System [Volume 15, Issue 2, 2019, Pages 103-118]
Metal-Composite joint Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
Metal Injection Molding Process The Numerical and Experimental Investigations of Injection Mold Filling and Determination of the Appropriate Conditions in Metal Injection Molding (MIM) [Volume 17, Issue 3, 2021, Pages 97-112]
Microbeam Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
Microstructure [Volume 14, Issue 2, 2018, Pages 89-99]
Micro Surface Hardness Experimental Study of Ultrasonic Assisted Surface Rolling Process [Volume 15, Issue 2, 2019, Pages 119-129]
Min-Max controller Min-Max Controller Design for Double Shaft Unmixed Turbofan Engine’s Thermodynamic Model [Volume 15, Issue 2, 2019, Pages 17-32]
Mission Profile [Volume 14, Issue 4, 2018, Pages 91-100]
Mixing efficiency Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
Modal Analysis Modeling, Fatigue Crack Growth Assessment and Modal Analysis for a Gas Turbine Compressor Blade [Volume 18, Issue 1, 2022, Pages 1-19]
MODE-FM algorithm Bi-objective Optimization Design of Active and Nonlinear Vehicle Suspension System Under Combinatorial Random Road Profile [Volume 20, Issue 1, 2024, Pages 89-105]
Model-Aided Inertial Navigation A Model-Aided Inertial Navigation System for the Remus 100 AUV [Volume 17, Issue 3, 2021, Pages 57-70]
Modeling and manufacturing Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]
Modeling Error Proposing a New Approach to Increase the Accuracy of the GPS / INS Integration System Based on an Incremental Predictive Filter During GPS Outage and it's Implementation in the Laboratory [Volume 17, Issue 4, 2021, Pages 97-108]
Modelling Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
Model Predictive Control Design and Implementation of Model Predictive Controller for Turbofan Engine Fuel Control [Volume 15, Issue 1, 2019, Pages 1-12]
Model Predictive Control Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
Model Predictive Motion Cueing [Volume 14, Issue 4, 2018, Pages 33-50]
Model test Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
Model uncertainty Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
Model updating Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm [Volume 19, Issue 4, 2023, Pages 71-83]
Model validation Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
Moldex3D The Numerical and Experimental Investigations of Injection Mold Filling and Determination of the Appropriate Conditions in Metal Injection Molding (MIM) [Volume 17, Issue 3, 2021, Pages 97-112]
Molecular Dynamics [Volume 14, Issue 1, 2018, Pages 55-64]
Molecular Dynamics Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
Molecular dynamics simulations A Molecular Dynamics Study on the Buckling Analysis of Functionalized Graphene with Nylon 6,6 in Aqueous Environment [Volume 19, Issue 4, 2023, Pages 1-10]
Monolayer Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
Monopropellant Thrusters Numerical Study of Catalyst Bed Length and Particle Size Effect on the Monopropellant Thruster Specific Impulse and Thrust [Volume 16, Issue 1, 2020, Pages 53-66]
Morphing wing Implementation of Shape Memory Alloy Spring Behavior in a Mechanism as a Torsional Actuator for Position Changing of Rocket Wing [Volume 17, Issue 1, 2021, Pages 99-114]
Motion System Inverse Kinematics [Volume 14, Issue 4, 2018, Pages 33-50]
Motor Current Milling Tool Wear Prediction by Feed Motor Current Signal using MLPs and ANFIS [Volume 15, Issue 1, 2019, Pages 51-62]
Moving Base Dynamic Analysis of a Novel Spherical Parallel Manipulator on the Moving Base Using the Principle of Virtual Work [Volume 17, Issue 2, 2021, Pages 13-27]
Moving Harmonic Loads [Volume 13, Issue 4, 2017, Pages 21-34]
Moving Mass Actuated Projectile The Moving Mass Actuated Projectile Attitude Control and Estimation Using a Predictive Controller and Estimator Based on the Particle Filter [Volume 17, Issue 3, 2021, Pages 45-56]
Moving network technique Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
MPC Controller Model predictive control design for a heavy articulated vehicle during critical lane change maneuver [Volume 16, Issue 2, 2020, Pages 39-53]
MR fluid layer [Volume 14, Issue 4, 2018, Pages 1-19]
Multi-agent system Time Varying Formation Control of Unmanned Aerial Vehicle Multi-Agent Systems with Unknown Leader Input [Volume 17, Issue 2, 2021, Pages 53-69]
Multi-agent system Optimal Formation Control for Unmanned Aerial Vehicle Teams with Collision Avoidance Constraint and Unknown Dynamics [Volume 19, Issue 1, 2023, Pages 61-79]
Multi-agent systems Flocking of Quadcopter Robots Observing Safety Distance [Volume 19, Issue 3, 2023, Pages 17-32]
Multi-agent systems (MAS) Finite Time Adaptive Sliding Mode Control of Multi-agent Systems via Unknown External Disturbance and Undirected Network [Volume 19, Issue 3, 2023, Pages 137-148]
Multidisciplinary Design Optimization Analysis and Optimization for a Projectile Under Stresses of Gun During Interior Ballistics [Volume 10, Issue 4, 2014, Pages 23-32]
Multidisciplinary Design Optimization Multidisciplinary Design Optimization of an Unmanned Air Vehicle and Final Solution Selection Based on Fuzzy Satisfaction Degree Function [Volume 15, Issue 1, 2019, Pages 107-122]
Multi-layered mixed configuration Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
Multi-Layer Neural Networks Milling Tool Wear Prediction by Feed Motor Current Signal using MLPs and ANFIS [Volume 15, Issue 1, 2019, Pages 51-62]
Multilayer Perceptron Online Methods for the Identification of Aircraft Model: Review and Comparison [Volume 17, Issue 4, 2021, Pages 109-117]
Multi Objective Optimization [Volume 14, Issue 4, 2018, Pages 91-100]
Multi-Objective Optimization The Multi-Objective Optimization of the Friction Stir Welding using the Taguchi Design Method, the Response Surface Model and the Particle Swarm Algorithm [Volume 17, Issue 4, 2021, Pages 39-54]
Multi phase nanocomposite [Volume 14, Issue 1, 2018, Pages 65-80]
Multiple particles impact Finite element investigation of multiple solid particle erosion of Al 7075-T6 and Ti-6Al-4V alloys [Volume 16, Issue 4, 2020, Pages 13-24]
MWCNT Comparison of thermophysical properties Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]

N

Nano accelelermeter sensor Design and Simulatuion of a Hybrid Nano Piezoelectric Resistive-Capacitive Accelerometer Sensor [Volume 15, Issue 4, 2019, Pages 67-82]
Nanocantilever beam Design and Simulatuion of a Hybrid Nano Piezoelectric Resistive-Capacitive Accelerometer Sensor [Volume 15, Issue 4, 2019, Pages 67-82]
Nano-composite panel [Volume 14, Issue 1, 2018, Pages 97-111]
Nano Composites Optimization of Mechanical Properties of trinary Nanocomposites Based on Polypropylene/Nitrile Rubber /Silica Nano-Powder by Using Response Surface methodology [Volume 15, Issue 3, 2019, Pages 107-117]
Nano-curved plate Analytical Modeling of Impact loading of Nanoparticles on the Nano-curved Plate [Volume 17, Issue 1, 2021, Pages 69-81]
Nanofluid Improving Performance and Decreasing of Cooling System Volume in Low Temperature PEM Fuel Cell Using Nanofluid [Volume 15, Issue 2, 2019, Pages 1-16]
Nanofluid Investigation of Laminar and Turbulent of Natural Convection of Nanofluid in a Trapezoidal Enclosure under the Influence of Magnetic Field [Volume 15, Issue 2, 2019, Pages 53-66]
Nano-oscillators Modeling the Oscillatory Behavior of Carbon Nano-onions Inside Single-walled Carbon Nanotubes Based on the Continuum Approximation Method [Volume 19, Issue 4, 2023, Pages 135-148]
Nanoparticle Analytical Modeling of Impact loading of Nanoparticles on the Nano-curved Plate [Volume 17, Issue 1, 2021, Pages 69-81]
Nano-scratching Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
NARMA L-2 Active Control of Suspension Oscillations in Aircraft by using NARMA-L2 Neural Controller [Volume 19, Issue 2, 2023, Pages 41-55]
National National Diesel Engine Studying Piston Cavity Geometry Effect on Direct Injection Diesel Engine Performance and Emissions with Numerical Simulation [Volume 14, Issue 3, 2018, Pages 29-39]
Natural Convection Investigation of Laminar and Turbulent of Natural Convection of Nanofluid in a Trapezoidal Enclosure under the Influence of Magnetic Field [Volume 15, Issue 2, 2019, Pages 53-66]
Natural Convection Analysis of Entropy and Heat Transfer of Non-Newtonian Ferrofluid Under the Effect of Various External and Internal Factors [Volume 20, Issue 1, 2024, Pages 1-25]
Natural frequency [Volume 14, Issue 4, 2018, Pages 1-19]
Natural frequency [Volume 14, Issue 4, 2018, Pages 51-59]
Natural frequency Analytical Analysis for Free Vibration of Different Arrangements of BNNTs under Initially Stress [Volume 15, Issue 3, 2019, Pages 33-46]
Natural frequency Free and forced vibration of rotating FGM beam with piezoelectric layer [Volume 16, Issue 1, 2020, Pages 1-13]
Natural frequency Nonlinear Vibration analysis of a composite cylindrical shell with internal pressure, subjected to a low velocity impact using analytical and FE methods [Volume 16, Issue 3, 2020, Pages 59-73]
Natural frequency Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
Natural frequency Fluid Flow Effects on Size-dependent Dynamic Response of Cantilever Microbeams using Modified Strain Gradient and Hyperbolic Shear Deformation Beam Theory [Volume 18, Issue 3, 2022, Pages 53-68]
Navigation-Guidance law Design of a Sliding Mode Controller with Optimal Parameters for Three-Dimensional Guidance Law Using Harmony Search Algorithm [Volume 16, Issue 1, 2020, Pages 31-38]
Network Flow Considering Terrain Contour MatchingSystem Requirements in the TF/TA Based Constraint Optimal Trajectory Design for UAVs [Volume 12, Issue 4, 2016, Pages 25-33]
Network method Modeling of Gas Turbine Combustion Chamber; By Using Network Method [Volume 14, Issue 3, 2018, Pages 1-17]
Neural Controller Active Control of Suspension Oscillations in Aircraft by using NARMA-L2 Neural Controller [Volume 19, Issue 2, 2023, Pages 41-55]
Neural Networks Error Rate Reduction of a Low-Cost Integrated Navigation System Using Neural Networks [Volume 15, Issue 3, 2019, Pages 17-32]
Newton-Euler Method [Volume 13, Issue 4, 2017, Pages 59-69]
Non-destructive test [Volume 14, Issue 1, 2018, Pages 1-10]
Nondestructive Test Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using Pulse Thermography [Volume 18, Issue 4, 2022, Pages 77-87]
Nondestructive Testing (NDT) [Volume 14, Issue 2, 2018, Pages 19-26]
Non-Destructive Testing of Pipes [Volume 14, Issue 2, 2018, Pages 81-88]
Non-Diaphragm shock tube Investigation of a new rapid opening valve for a non-Diaphragm Shock Tube [Volume 16, Issue 1, 2020, Pages 99-107]
Non-dimensional analysis The Behavior of Quadrangular Plates under Impulsive Loading: a Dimensional Analysis [Volume 16, Issue 4, 2020, Pages 85-99]
Non-Gray Medium The Combination of Discrete Ordinates and Full-Spectrum k-Distribution Methods to Analysis of Radiative-Conductive Heat Transfer in a Two Dimensional Enclosure [Volume 17, Issue 1, 2021, Pages 51-67]
Nonholonomic Constraints Trajectory tracking of a wheeled mobile robot using Backstepping and Sliding mode approaches [Volume 16, Issue 1, 2020, Pages 83-98]
Nonlinear Autopilot Robust Nonlinear Autopilot Design Based on Feedback Linearization and Extended State Observers for Interceptors [Volume 17, Issue 2, 2021, Pages 1-12]
Nonlinear Beam The Study of the Stochastic Jump Phenomenon in a Nonlinear Cantilever Beam Immersed in Water Under Narrow-Band Random Excitation [Volume 17, Issue 3, 2021, Pages 85-95]
Nonlinear Beam Study of Phenomena of Jump and Chaos in a Non-linear Beam with Concentrated Mass Under the Effects of Water Flow [Volume 18, Issue 2, 2022, Pages 157-167]
Nonlinear bending [Volume 14, Issue 1, 2018, Pages 97-111]
Nonlinear Control Behavioral Guidance and Control of a Flying Robot for Leader-Follower Concept [Volume 15, Issue 1, 2019, Pages 13-24]
Nonlinear dynamic analysis [Volume 14, Issue 1, 2018, Pages 11-26]
Nonlinear Dynamic Model A Model-Aided Inertial Navigation System for the Remus 100 AUV [Volume 17, Issue 3, 2021, Pages 57-70]
Nonlinear Estimator The Moving Mass Actuated Projectile Attitude Control and Estimation Using a Predictive Controller and Estimator Based on the Particle Filter [Volume 17, Issue 3, 2021, Pages 45-56]
Nonlinear free and forced vibrations Nonlinear Response and Stability of Flexoelectric Nanotube Conveying Fluid under Temperature Field using Nonlocal Strain Gradient Theory [Volume 18, Issue 1, 2022, Pages 21-39]
Nonlinear low-velocity impact [Volume 14, Issue 1, 2018, Pages 65-80]
Nonlinear model predictive control A Model of Predictive Terminal Guidance Based on Whale Optimization Algorithm Considering the Aerodynamic Model of the Pursuer [Volume 17, Issue 1, 2021, Pages 37-50]
Nonlinear model predictive control The Moving Mass Actuated Projectile Attitude Control and Estimation Using a Predictive Controller and Estimator Based on the Particle Filter [Volume 17, Issue 3, 2021, Pages 45-56]
Non-linear Optimal Control Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
Nonlinear Programming Optimal Reentry Guidance using a Combined Method [Volume 12, Issue 4, 2016, Pages 35-48]
Nonlinear response Investigation of Transient Nonlinear Response of Fiber Metal Laminates (FML’s) under Uniform Time-dependent Pressure Loading [Volume 18, Issue 3, 2022, Pages 109-125]
Nonlinear vibration Energy Harvesting from Nonlinear Vibrating System Using Two Impacting Cantilever Beam [Volume 15, Issue 1, 2019, Pages 75-88]
Nonlinear vibration Nonlinear Vibration Analysis of a Composite Cylindrical Shell on a Viscoelastic Foundation and under Subsonic External Air Flow [Volume 15, Issue 3, 2019, Pages 127-139]
Nonlinear vibrations Nonlinear Vibration analysis of a composite cylindrical shell with internal pressure, subjected to a low velocity impact using analytical and FE methods [Volume 16, Issue 3, 2020, Pages 59-73]
Nonlinear vibrations The Study of the Stochastic Jump Phenomenon in a Nonlinear Cantilever Beam Immersed in Water Under Narrow-Band Random Excitation [Volume 17, Issue 3, 2021, Pages 85-95]
Nonlinear vibrations Study of Phenomena of Jump and Chaos in a Non-linear Beam with Concentrated Mass Under the Effects of Water Flow [Volume 18, Issue 2, 2022, Pages 157-167]
Non-Newtonian nanofluid Numerical Evaluation via Lattice Boltzmann Method to Analyze of Entropy Generation due to Conjugate Mixed Convection Heat Transfer of Non-Newtonian Nanofluid under the Influence of Magnetic Field [Volume 19, Issue 2, 2023, Pages 113-129]
Non-Newtonian nanofluid Analysis of Entropy and Heat Transfer of Non-Newtonian Ferrofluid Under the Effect of Various External and Internal Factors [Volume 20, Issue 1, 2024, Pages 1-25]
Nonsingular Terminal Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
Non-uniform magnetic field Analysis of Entropy and Heat Transfer of Non-Newtonian Ferrofluid Under the Effect of Various External and Internal Factors [Volume 20, Issue 1, 2024, Pages 1-25]
Notch Preventing Unwanted Vibrations in the Environmental Test of Random Vibrations of a Spacecraft by Power Spectrum Density Notching [Volume 19, Issue 1, 2023, Pages 17-28]
Novel energy formulation [Volume 14, Issue 1, 2018, Pages 81-96]
Numerical Method [Volume 14, Issue 1, 2018, Pages 27-38]
Numerical Method Energy Harvesting from Nonlinear Vibrating System Using Two Impacting Cantilever Beam [Volume 15, Issue 1, 2019, Pages 75-88]
Numerical Simulation Studying Piston Cavity Geometry Effect on Direct Injection Diesel Engine Performance and Emissions with Numerical Simulation [Volume 14, Issue 3, 2018, Pages 29-39]
Numerical Simulation Numerical Analysis of Film-Cooling over the Rotating Turbine Blade Using Laterally-Diffused Hole [Volume 14, Issue 3, 2018, Pages 41-54]
Numerical Simulation Numerical Investigation of a SI-Engine Performance Equipped with a Variable Valve Timing System [Volume 14, Issue 3, 2018, Pages 55-69]
Numerical Simulation Numerical Investigation Effect of Film cooling with Mixed Heat Transfer in Wall Temperature of LRE Thrust Chamber [Volume 14, Issue 3, 2018, Pages 71-82]
Numerical Simulation Performance Improvement of the Solar Heat Pump Using Carbon Nanotubes in the Refrigerant and its Condenser Structure [Volume 16, Issue 3, 2020, Pages 75-84]
Numerical Simulation The Study of Scan Speed and Laser Power Effects on the Molten Pool in Selective Laser Melting of Ti6Al4V Based on the Molten Motion Equations [Volume 17, Issue 3, 2021, Pages 1-15]
Numerical Simulation Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
Numerical Simulation Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
Numerical Simulation Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
Numerical Simulation Optimization of Effective Parameters on the Bending Behavior of Honeycomb Sandwich Panels Using Response Surface Method [Volume 19, Issue 3, 2023, Pages 61-78]
Numerical Simulations Numerical Simulation of Triangular Plate Deformation Profile Under Gaseous Detonation Loading [Volume 19, Issue 1, 2023, Pages 1-15]
Numerical study Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
NURBS [Volume 14, Issue 2, 2018, Pages 67-80]
Nylon 6 A Molecular Dynamics Study on the Buckling Analysis of Functionalized Graphene with Nylon 6,6 in Aqueous Environment [Volume 19, Issue 4, 2023, Pages 1-10]

O

Oblique blast loading Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
Observer Motion Trajectory Control and Robust Control Based on Nonlinear Bicycle Model to Stabilization for In-wheel Motor Electric Vehicle in Emergency Scenario [Volume 20, Issue 1, 2024, Pages 109-124]
Observer estimation error Designing an Adaptive Fuzzy Extended State Observer for Nonlinear Affine Systems with External Disturbance [Volume 18, Issue 2, 2022, Pages 109-124]
ODP Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]
Off Design Simulation and Thermodynamic Analysis of Twin Spool Turbofan Engine at the On Design and Off Design Conditions [Volume 15, Issue 4, 2019, Pages 95-108]
Offsetting [Volume 14, Issue 2, 2018, Pages 67-80]
Oil Analysis Diagnosis of Diesel Engine Based on Oil Analysis Using Convolutional Neural Network and Visualization [Volume 19, Issue 3, 2023, Pages 123-136]
One-dimensional Modeling Parametric study on the performance of a gasoline turbocharged aircraft engine at high altitudes using a one-dimensional model [Volume 16, Issue 1, 2020, Pages 67-82]
Open-end pressure-swirl atomizer Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
Optimal control Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control [Volume 19, Issue 4, 2023, Pages 11-26]
Optimal Guidance Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
Optimization Optimization of Mechanical Properties of trinary Nanocomposites Based on Polypropylene/Nitrile Rubber /Silica Nano-Powder by Using Response Surface methodology [Volume 15, Issue 3, 2019, Pages 107-117]
Optimization Optimization of Copper Mirrors Polishing Parameters by Chemical-Mechanical Method [Volume 15, Issue 3, 2019, Pages 119-126]
Optimization Minimization of Peeling Stress in an Adhesively Single-lap Joint Using the Bees Algorithm [Volume 16, Issue 4, 2020, Pages 71-83]
Optimization Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
Orientation estimation Improved Complementary Filters for Estimation of Heading and Attitude Angles in Accelerated Motion [Volume 19, Issue 2, 2023, Pages 131-143]
Overall heat transfer coefficient Optimizing the Cooling System of an LH2/LOX Rocket Engine using the Bees Algorithm [Volume 19, Issue 3, 2023, Pages 109-121]

P

Pad Transient Temperature Field Analysis of FGM Brake Disk and Pad as a Symmetric Three-Dimensional Model [Volume 18, Issue 1, 2022, Pages 41-52]
Parafoil-Payload system Six Degree of Freedom Simulation and Hybrid Guidance of Parafoil-Payload Systems Considering Wind and Terrain Constraints [Volume 17, Issue 1, 2021, Pages 21-36]
Parallel Distributed Compensator approach Velocity of Control of Electro Hydraulic Servo System by Using Fuzzy Coupled Method [Volume 15, Issue 1, 2019, Pages 39-50]
Parallel Mechanism [Volume 14, Issue 2, 2018, Pages 1-17]
Parameter uncertainty Improving  H Control using new Robust Model Reference Sliding-Fuzzy Algorithm for High Speed Train Active Suspension System [Volume 12, Issue 4, 2016, Pages 113-123]
Parameter uncertainty Robust Adaptive Backstepping Control of Automated Vehicle Convoys in the Presence of Combined Actuator Fault, Parameter Uncertainties, and External Disturbance by Considering Speed Constraints [Volume 19, Issue 4, 2023, Pages 119-133]
Parametric Study Exergy Analysis of a Gas to Liquid Compact Heat Exchanger as an Intercooler in Various Working Conditions [Volume 16, Issue 3, 2020, Pages 85-98]
Pareto Bi-objective Optimization Design of Active and Nonlinear Vehicle Suspension System Under Combinatorial Random Road Profile [Volume 20, Issue 1, 2024, Pages 89-105]
Particle Filter Data Fusion of Gyroscope and Magnetometer to Estimate the Attitude of High-Speed Projectiles Based on Particle Filter and PSO [Volume 16, Issue 1, 2020, Pages 15-30]
Particle Filter The Moving Mass Actuated Projectile Attitude Control and Estimation Using a Predictive Controller and Estimator Based on the Particle Filter [Volume 17, Issue 3, 2021, Pages 45-56]
Payload identification Estimation of the Payload mass in DELTA robot by using the motor torque [Volume 16, Issue 2, 2020, Pages 27-38]
Peeling stress Minimization of Peeling Stress in an Adhesively Single-lap Joint Using the Bees Algorithm [Volume 16, Issue 4, 2020, Pages 71-83]
PEEQ Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
PELE Investigating the Penetration and Fragmentation of the PELE Projectile using the Methods of Dynamic Expansion of the Spherical Cavity and the Shock Wave [(Articles in Press)]
Penetration Depth Numerical Analysis of Shaped Charge Bimetallic Liners Effects on Diameter and Depth of Penetration into Steel Targets [Volume 15, Issue 3, 2019, Pages 93-105]
Penetration nose optimization Optimizing the shape of the penetrator nose into Compressible Concrete in order to achieve the maximum penetration depth [Volume 17, Issue 2, 2021, Pages 101-115]
Penetrator nose design Optimizing the shape of the penetrator nose into Compressible Concrete in order to achieve the maximum penetration depth [Volume 17, Issue 2, 2021, Pages 101-115]
Perforated plate Experimental and Numerical Investigation on the Deviation of High Velocity Blunt Projectile after Impact on the Perforated Plate [Volume 17, Issue 2, 2021, Pages 71-84]
Performance deterioration Thermodynamic Simulation of Fouling and Erosion in an Industrial Gas Turbine for Power Generation Applications [Volume 19, Issue 4, 2023, Pages 53-69]
Phase Portraites [Volume 14, Issue 4, 2018, Pages 61-74]
Phase transformation models Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
PID Controller Implementation of Adaptive and Proportional-Integral Algorithms in Servo Hydraulic Fatigue Testing Machines [Volume 12, Issue 4, 2016, Pages 1-9]
PID Controller Constrained Optimal Controller Design for a Flight Vehicle Based on Predictive Control Approach and its Implementation in the Hardware in the Loop Lab [Volume 15, Issue 3, 2019, Pages 79-92]
Piezoelectric Dynamic and Vibration Analysis of Composite Cylindrical Shell with Piezoelectric Layers [Volume 16, Issue 2, 2020, Pages 15-25]
Piezoelectric Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
Piezoelectric Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
Piezoelectric Integral Sliding Mode Fault-Tolerant Control and Active Vibration Suppression of a Flexible Spacecraft in the Presence of External Disturbances [Volume 19, Issue 1, 2023, Pages 137-151]
Piezoelectric capacitive-resistive nano sensor Design and Simulatuion of a Hybrid Nano Piezoelectric Resistive-Capacitive Accelerometer Sensor [Volume 15, Issue 4, 2019, Pages 67-82]
Piezoelectric layer Free and forced vibration of rotating FGM beam with piezoelectric layer [Volume 16, Issue 1, 2020, Pages 1-13]
Piezoelectric layer Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
Piezoelectric Layers Aeroelastic Analysis of Reinforced Curved Panels by Nano-Graphene Plates [Volume 17, Issue 2, 2021, Pages 29-52]
Piezoelectric Sensor [Volume 14, Issue 2, 2018, Pages 81-88]
Pipes Conveying Flow Static and Dynamic Stability Analysis of Pipes Conveying Fluid with Different Boundary Conditions [Volume 17, Issue 1, 2021, Pages 1-10]
Piston Bowl Geometry Studying Piston Cavity Geometry Effect on Direct Injection Diesel Engine Performance and Emissions with Numerical Simulation [Volume 14, Issue 3, 2018, Pages 29-39]
Pitching Moment Coefficient [Volume 14, Issue 4, 2018, Pages 21-32]
Planar shock wave The Experimental Study of the Effect of a Diaphragm Thickness on the Position of Planar Shock Wave Formation in a Gas Shock Tube [Volume 15, Issue 4, 2019, Pages 83-94]
Planing craft Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
Planing vessel Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
Plastic deformation Studies on the effect of reinforcers types on flat and curved steel sheets’ performance under drop impact [Volume 16, Issue 4, 2020, Pages 39-59]
Plate deformation Experimental study and regression analysis of free and die forming of circular metallic plates using gas mixture explosion [Volume 17, Issue 2, 2021, Pages 85-99]
Ploughing work Investigation of the Effect of Adhesion Between Two Surfaces on the Frictional Work and Wear at the Nanoscale Using Molecular Dynamics [Volume 18, Issue 1, 2022, Pages 161-169]
Polymer Electrolyte Membrane Fuel Cell Experimental Investigation of the Effect of Cathode Side Liquid Water Accumulation on the Impedance of a Dead Ended Polymer Electrolyte Membrane Fuel Cell by Electrochemical Impedance Spectroscopy Method [Volume 19, Issue 2, 2023, Pages 95-111]
Polymer nanocomposite [Volume 14, Issue 1, 2018, Pages 55-64]
Polypropylene Optimization of Mechanical Properties of trinary Nanocomposites Based on Polypropylene/Nitrile Rubber /Silica Nano-Powder by Using Response Surface methodology [Volume 15, Issue 3, 2019, Pages 107-117]
Poly Vinyl Alcohol Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
Porosity Analytical Solution for Buckling of Annular Sectorial Porous Plates [Volume 15, Issue 1, 2019, Pages 137-152]
Post buckling Thermal Buckling and Postbuckling Analysis of Plates Reinforced with Graphene Platelets Using Differential Quadrature Method [Volume 19, Issue 4, 2023, Pages 103-117]
Post-buckling Buckling and Post-buckling Analysis of a Sandwich Panel with Flexible Core Reinforced with Memory Alloy Wires (SMA) [Volume 17, Issue 1, 2021, Pages 83-97]
Potential functions Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
Power spectrum density Preventing Unwanted Vibrations in the Environmental Test of Random Vibrations of a Spacecraft by Power Spectrum Density Notching [Volume 19, Issue 1, 2023, Pages 17-28]
Predictive Control Application and Evaluation of Laguerre Functions in Helicopter Flight Control System Designed by Model Predictive Control [Volume 15, Issue 1, 2019, Pages 25-38]
Predictive Control Constrained Optimal Controller Design for a Flight Vehicle Based on Predictive Control Approach and its Implementation in the Hardware in the Loop Lab [Volume 15, Issue 3, 2019, Pages 79-92]
Predictive Estimation Design and Implementation of a Centralized Predictive Model Estimation Algorithm with the Fuzzy Approach for In-Motion Alignment of a Low-cost Integrated INS/GPS Inertial Navigation System [Volume 17, Issue 4, 2021, Pages 1-14]
Predictive functional controller The Design of a Fractional-order Predictive Functional Controller for the Magnetic Levitation System [Volume 16, Issue 4, 2020, Pages 1-12]
Pressure Drop Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]
Pressure Vessel [Volume 14, Issue 1, 2018, Pages 27-38]
Pressurized cylinders Numerical Study on Rehabilitation of the Pressurized Pipes Containing Longitudinal External Crack using CFRP under Service Load [(Articles in Press)]
Pressurized pipes Numerical Study on Rehabilitation of the Pressurized Pipes Containing Longitudinal External Crack using CFRP under Service Load [(Articles in Press)]
Principle of Virtual Work Dynamic Analysis of a Novel Spherical Parallel Manipulator on the Moving Base Using the Principle of Virtual Work [Volume 17, Issue 2, 2021, Pages 13-27]
Process disturbance Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
Production Process Detecting a defective pin through the image processing in the production line [Volume 16, Issue 2, 2020, Pages 87-96]
Prognostics & Health Management (PHM) Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Projectile Experimental and Numerical Investigation on the Deviation of High Velocity Blunt Projectile after Impact on the Perforated Plate [Volume 17, Issue 2, 2021, Pages 71-84]
Projectile penetration Experimental Investigation of High Velocity Projectile Penetration into Innegra Fabric Composite [Volume 20, Issue 1, 2024, Pages 125-141]
Proportional control Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control [Volume 19, Issue 4, 2023, Pages 11-26]
Proportional Integral Derivative Control Optimal Control of an Aircraft Pitch Angle using PID and Sliding Mode Control Based on PSO Algorithm [Volume 15, Issue 4, 2019, Pages 49-66]
Pulsed Laser Accuracy and Performance Evaluation of the Parameters Involved in Pulse Laser Metrology Using Time Window Gate Technique [Volume 18, Issue 4, 2022, Pages 1-16]
PWPF modulator Flutter Control of a Quasi-three-dimensional Wing in Simplified Unsteady Flow using Forced Jet [Volume 20, Issue 1, 2024, Pages 45-58]

Q

Quadcopter Flocking of Quadcopter Robots Observing Safety Distance [Volume 19, Issue 3, 2023, Pages 17-32]
Quad-Copter Behavioral Guidance and Control of a Flying Robot for Leader-Follower Concept [Volume 15, Issue 1, 2019, Pages 13-24]
Quadrangular plate The Behavior of Quadrangular Plates under Impulsive Loading: a Dimensional Analysis [Volume 16, Issue 4, 2020, Pages 85-99]
Quadratic function Analysis of Heat Conduction in a Quadratic Functionally Graded Plane by Boundary Element Method Based on the Variable Transmission Approach [Volume 15, Issue 2, 2019, Pages 77-89]
Quadrotor attitude control Fault-Tolerant Optimal Attitude Tracking Control of Quadrotor Subject to State and Input Constraints Using Safe Reinforcement Learning [Volume 20, Issue 1, 2024, Pages 143-162]
Quasi-static Investigating the Energy Absorption Parameters of Steel Cylindrical Shells Filled with Polyethylene Subjected to Quasi-static Loading [Volume 18, Issue 4, 2022, Pages 65-76]
Quaternion Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control [Volume 19, Issue 4, 2023, Pages 41-52]

R

R-406a Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]
Radial Basis Function Online Methods for the Identification of Aircraft Model: Review and Comparison [Volume 17, Issue 4, 2021, Pages 109-117]
Radial Pressure [Volume 14, Issue 2, 2018, Pages 43-55]
Ramp Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
Random Excitation The Study of the Stochastic Jump Phenomenon in a Nonlinear Cantilever Beam Immersed in Water Under Narrow-Band Random Excitation [Volume 17, Issue 3, 2021, Pages 85-95]
Random finite element Numerical Investigation of the Effect of Shot Peening Parameters on the Residual Stresses Using a Random Three-dimensional Finite Element Model [Volume 20, Issue 1, 2024, Pages 77-88]
Random Road The Design of a Seat Controller for the Half Car Model in Various Vibrating Conditions Using the Seated Human Body Situation [Volume 17, Issue 4, 2021, Pages 29-38]
Random road input Bi-objective Optimization Design of Active and Nonlinear Vehicle Suspension System Under Combinatorial Random Road Profile [Volume 20, Issue 1, 2024, Pages 89-105]
Random vibration Preventing Unwanted Vibrations in the Environmental Test of Random Vibrations of a Spacecraft by Power Spectrum Density Notching [Volume 19, Issue 1, 2023, Pages 17-28]
Random Vibrations The Study of the Stochastic Jump Phenomenon in a Nonlinear Cantilever Beam Immersed in Water Under Narrow-Band Random Excitation [Volume 17, Issue 3, 2021, Pages 85-95]
Rapid opening valve Investigation of a new rapid opening valve for a non-Diaphragm Shock Tube [Volume 16, Issue 1, 2020, Pages 99-107]
Reaction wheels Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
Receding Horizon Control Optimal Reentry Guidance using a Combined Method [Volume 12, Issue 4, 2016, Pages 35-48]
Recrystallization [Volume 14, Issue 2, 2018, Pages 89-99]
Recursive Algorithms Online Methods for the Identification of Aircraft Model: Review and Comparison [Volume 17, Issue 4, 2021, Pages 109-117]
Recursive Least Square Estimation of the Payload mass in DELTA robot by using the motor torque [Volume 16, Issue 2, 2020, Pages 27-38]
Red Blood Cell (RBC) Design of a Scaled Framework for Perforation Behavior Analysis of Red Blood Cell Membrane Subjected to Impact Loading by Nanoparticle [Volume 20, Issue 1, 2024, Pages 163-179]
Redundancy The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
Regenerative cooling Study on the influence of surface roughness on the performance of regenerative cooling in liquid propellant engine [Volume 16, Issue 3, 2020, Pages 99-105]
Regression Analysis Experimental study and regression analysis of free and die forming of circular metallic plates using gas mixture explosion [Volume 17, Issue 2, 2021, Pages 85-99]
Regression Model A Guidance law for interception of very high-speed targets using a simulator-based learning algorithm [Volume 16, Issue 3, 2020, Pages 49-57]
Rehabilitation Numerical Study on Rehabilitation of the Pressurized Pipes Containing Longitudinal External Crack using CFRP under Service Load [(Articles in Press)]
Reinforcement Learning (RL) Optimal Formation Control for Unmanned Aerial Vehicle Teams with Collision Avoidance Constraint and Unknown Dynamics [Volume 19, Issue 1, 2023, Pages 61-79]
Relative Fatigue Life Experimental Study of Ultrasonic Assisted Surface Rolling Process [Volume 15, Issue 2, 2019, Pages 119-129]
Repeated explosion Female Die Forming of Metallic Plates using Repeated Underwater Explosions [(Articles in Press)]
Repeated loading Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
Repeated loading Plastic Deformation of Similar and Dissimilar Multi-layered Metallic Plates with the Same Areal Density Subjected to Repeated Impulsive Loading [Volume 18, Issue 1, 2022, Pages 137-159]
Repeated loading Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
Residual stress Numerical Investigation of the Effect of Shot Peening Parameters on the Residual Stresses Using a Random Three-dimensional Finite Element Model [Volume 20, Issue 1, 2024, Pages 77-88]
Response Surface Methodology Optimization of Mechanical Properties of trinary Nanocomposites Based on Polypropylene/Nitrile Rubber /Silica Nano-Powder by Using Response Surface methodology [Volume 15, Issue 3, 2019, Pages 107-117]
Response Surface Methodology Experimental study and regression analysis of free and die forming of circular metallic plates using gas mixture explosion [Volume 17, Issue 2, 2021, Pages 85-99]
Response Surface Methodology The Multi-Objective Optimization of the Friction Stir Welding using the Taguchi Design Method, the Response Surface Model and the Particle Swarm Algorithm [Volume 17, Issue 4, 2021, Pages 39-54]
Response Surface Methodology Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
Ribs Simulation of Heat Transfer in A Ribbed Channel of A Gas Turbine Blade [Volume 14, Issue 3, 2018, Pages 19-28]
Ring and stringer stiffened Vibrations of a Rotating Functionally Graded Cylindrical Shell under Pressure with Ring and Stringer Stiffened [Volume 15, Issue 4, 2019, Pages 1-14]
RNG Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
Robust Robust Nonlinear Autopilot Design Based on Feedback Linearization and Extended State Observers for Interceptors [Volume 17, Issue 2, 2021, Pages 1-12]
Robust backstepping control Fuzzy Robust Backstepping Control Design for Control of Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 15, Issue 1, 2019, Pages 123-135]
Robust Control Improving  H Control using new Robust Model Reference Sliding-Fuzzy Algorithm for High Speed Train Active Suspension System [Volume 12, Issue 4, 2016, Pages 113-123]
Robust Control Nonlinear Active Steering Controller for Improvement of Vehicle Lateral Stability [Volume 15, Issue 3, 2019, Pages 47-60]
Robust Control Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
Robust Control Designing a Generalized Predictive Control with Self-Tuning Regulator Structure to Prevent the Effect of Actuator Rate Saturation [Volume 18, Issue 2, 2022, Pages 79-96]
Robust Control Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
Robust Control of Sliding Mode In this paper, tracking control of unmanned surface vessels by using the robust mode sliding control in the presence of fixed and moving obstacles are investigated. The mathematical model of vessels is in three degree of freedom (3DOF) and only contains the kinematics and dynamics of relevant to surge, sway and yaw. These vessels are controlled in under actuated manner; although they have (3DOF), but only are equipped [Volume 13, Issue 4, 2017, Pages 11-19]
Robust Guidance Design of a Sliding Mode Controller with Optimal Parameters for Three-Dimensional Guidance Law Using Harmony Search Algorithm [Volume 16, Issue 1, 2020, Pages 31-38]
Robust Quasi-Sliding Mode Control (RQSMC) Applying Robust Quasi-Sliding Mode Approach for Attitude Control of a Flexible Spacecraft [Volume 19, Issue 3, 2023, Pages 97-108]
Rotating beam Free Vibration Analysis Of Thick Functionally Graded Rotating Beam By Differential Transform Method [Volume 12, Issue 4, 2016, Pages 49-61]
Rotating beam Free and forced vibration of rotating FGM beam with piezoelectric layer [Volume 16, Issue 1, 2020, Pages 1-13]
Rotating cylindrical shell Vibrations of a Rotating Functionally Graded Cylindrical Shell under Pressure with Ring and Stringer Stiffened [Volume 15, Issue 4, 2019, Pages 1-14]
Rotating Stall Analysis of Instabilities in Compressor of J79 Engine [Volume 14, Issue 3, 2018, Pages 95-104]
Rotating Structure Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
Rotating tapered beam Natural Frequencies Analysis of a Rotating Tapered Timoshenko Beam Made of Functionally Graded Material with Actuated Piezoelectric Layer [Volume 18, Issue 2, 2022, Pages 143-156]
Rotation speed Numerical Analysis of Film-Cooling over the Rotating Turbine Blade Using Laterally-Diffused Hole [Volume 14, Issue 3, 2018, Pages 41-54]
Rotax 914 Parametric study on the performance of a gasoline turbocharged aircraft engine at high altitudes using a one-dimensional model [Volume 16, Issue 1, 2020, Pages 67-82]
RSM Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
Rubbers Design of a Scaled Framework for Perforation Behavior Analysis of Red Blood Cell Membrane Subjected to Impact Loading by Nanoparticle [Volume 20, Issue 1, 2024, Pages 163-179]
Runge Kutta method Investigation of Transient Nonlinear Response of Fiber Metal Laminates (FML’s) under Uniform Time-dependent Pressure Loading [Volume 18, Issue 3, 2022, Pages 109-125]
Runner & Gate Position The Numerical and Experimental Investigations of Injection Mold Filling and Determination of the Appropriate Conditions in Metal Injection Molding (MIM) [Volume 17, Issue 3, 2021, Pages 97-112]

S

Safe reinforcement learning Fault-Tolerant Optimal Attitude Tracking Control of Quadrotor Subject to State and Input Constraints Using Safe Reinforcement Learning [Volume 20, Issue 1, 2024, Pages 143-162]
Sandwich Panel Aeroelastic Analysis of Reinforced Curved Panels by Nano-Graphene Plates [Volume 17, Issue 2, 2021, Pages 29-52]
Sandwich panels Buckling and Post-buckling Analysis of a Sandwich Panel with Flexible Core Reinforced with Memory Alloy Wires (SMA) [Volume 17, Issue 1, 2021, Pages 83-97]
Sandwich panels The Experimental and Analytical Response of Circular Metal Sandwich Panels with Tubular Cores under Blast Load [Volume 17, Issue 4, 2021, Pages 81-95]
Sandwich panels Experimental and Numerical Investigation of Trapezoidal Corrugated Core Sandwich Panels Under Oblique Blast Loading [Volume 19, Issue 2, 2023, Pages 11-23]
Satellite Attitude Control system Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
Satisfaction Degree Function Multidisciplinary Design Optimization of an Unmanned Air Vehicle and Final Solution Selection Based on Fuzzy Satisfaction Degree Function [Volume 15, Issue 1, 2019, Pages 107-122]
Saturation curve Numerical Investigation of the Effect of Shot Peening Parameters on the Residual Stresses Using a Random Three-dimensional Finite Element Model [Volume 20, Issue 1, 2024, Pages 77-88]
Scaling Design of a Scaled Framework for Perforation Behavior Analysis of Red Blood Cell Membrane Subjected to Impact Loading by Nanoparticle [Volume 20, Issue 1, 2024, Pages 163-179]
Scan speed The Study of Scan Speed and Laser Power Effects on the Molten Pool in Selective Laser Melting of Ti6Al4V Based on the Molten Motion Equations [Volume 17, Issue 3, 2021, Pages 1-15]
Scramjet Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
SDRE Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
Seated Human body The Design of a Seat Controller for the Half Car Model in Various Vibrating Conditions Using the Seated Human Body Situation [Volume 17, Issue 4, 2021, Pages 29-38]
Selective laser melting (SLM) The Study of Scan Speed and Laser Power Effects on the Molten Pool in Selective Laser Melting of Ti6Al4V Based on the Molten Motion Equations [Volume 17, Issue 3, 2021, Pages 1-15]
Selective Laser Sintering Experimental Study and Optimization of the Powder Coating Layer in the Selective Laser Sintering Process [Volume 18, Issue 4, 2022, Pages 119-131]
Sensor Fusion Multi-Sensory Data Fusion System for Tool Condition Monitoring Using Optimized Artificial Fuzzy Inference System [Volume 15, Issue 2, 2019, Pages 103-118]
Severe plastic deformation Mode I Fracture Behavior of 6061 Aluminum Alloy Processed by Friction Stir Processing [Volume 19, Issue 2, 2023, Pages 83-94]
Severe plastic deformation Improving Wear Behavior of 304L Stainless Steel under Constrained Groove Pressing [(Articles in Press)]
SFC Simulation and Thermodynamic Analysis of Twin Spool Turbofan Engine at the On Design and Off Design Conditions [Volume 15, Issue 4, 2019, Pages 95-108]
Shanon Entropy Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
Shaped Charge Numerical Analysis of Shaped Charge Bimetallic Liners Effects on Diameter and Depth of Penetration into Steel Targets [Volume 15, Issue 3, 2019, Pages 93-105]
Shape memory alloy Fuzzy-PID Control of Mechanisms with Contrary Shape Memory Alloy Actuators [Volume 18, Issue 2, 2022, Pages 97-108]
Shape Memory Alloys Buckling and Post-buckling Analysis of a Sandwich Panel with Flexible Core Reinforced with Memory Alloy Wires (SMA) [Volume 17, Issue 1, 2021, Pages 83-97]
Shape memory alloy spring Implementation of Shape Memory Alloy Spring Behavior in a Mechanism as a Torsional Actuator for Position Changing of Rocket Wing [Volume 17, Issue 1, 2021, Pages 99-114]
Shape Memory Polymer Experimental and Numerical Study on the Effect of 3D Printing Geometrical Parameters on the Torsional Shape Recovery Behavior of Polylactic Acid [Volume 18, Issue 2, 2022, Pages 169-181]
Sheet forming Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
Shock model Investigating the Penetration and Fragmentation of the PELE Projectile using the Methods of Dynamic Expansion of the Spherical Cavity and the Shock Wave [(Articles in Press)]
Shock tube [Volume 14, Issue 2, 2018, Pages 27-42]
Shock tube The Experimental Study of the Effect of a Diaphragm Thickness on the Position of Planar Shock Wave Formation in a Gas Shock Tube [Volume 15, Issue 4, 2019, Pages 83-94]
Shock wave [Volume 14, Issue 2, 2018, Pages 27-42]
Shot peening Numerical Investigation of the Effect of Shot Peening Parameters on the Residual Stresses Using a Random Three-dimensional Finite Element Model [Volume 20, Issue 1, 2024, Pages 77-88]
Shot peening intensity Numerical Investigation of the Effect of Shot Peening Parameters on the Residual Stresses Using a Random Three-dimensional Finite Element Model [Volume 20, Issue 1, 2024, Pages 77-88]
SI- engine Numerical Investigation of a SI-Engine Performance Equipped with a Variable Valve Timing System [Volume 14, Issue 3, 2018, Pages 55-69]
Signal Processing [Volume 14, Issue 2, 2018, Pages 81-88]
Signal Processing [Volume 14, Issue 4, 2018, Pages 101-113]
Simulations The Numerical and Experimental Investigations of Injection Mold Filling and Determination of the Appropriate Conditions in Metal Injection Molding (MIM) [Volume 17, Issue 3, 2021, Pages 97-112]
Simultaneously Attitude and Orbit Determination [Volume 13, Issue 4, 2017, Pages 47-58]
Single-lap joint Investigating the Effect of 2-D Defects on Tensile and Creep Behavior of Single-lap Ceramic-metal Adhesive Joints [Volume 18, Issue 2, 2022, Pages 67-78]
Single-Objective Optimization Optimizing the Cooling System of an LH2/LOX Rocket Engine using the Bees Algorithm [Volume 19, Issue 3, 2023, Pages 109-121]
Single Point Incremental Forming Determination of Failure in Single Point Incremental Forming using Generalized Forming Limit Diagram [(Articles in Press)]
Single-walled carbon nanotubes Modeling the Oscillatory Behavior of Carbon Nano-onions Inside Single-walled Carbon Nanotubes Based on the Continuum Approximation Method [Volume 19, Issue 4, 2023, Pages 135-148]
Singularity The Elimination of Singularity to Track Aerial Objects Using a 3-DOF Pedestal [Volume 18, Issue 1, 2022, Pages 77-89]
Singular perturbation Perturbation Analysis Of Heat Transfer in Porous Media with Small Thermal Conductivity [Volume 14, Issue 3, 2018, Pages 83-93]
Singular points [Volume 14, Issue 2, 2018, Pages 1-17]
Sled Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
Slender Body Numerical Analysis of Aerodynamic Interference of Two Passing Cylindrical Bodies at Supersonic Speeds [Volume 19, Issue 3, 2023, Pages 79-95]
Sliding Mode Improving  H Control using new Robust Model Reference Sliding-Fuzzy Algorithm for High Speed Train Active Suspension System [Volume 12, Issue 4, 2016, Pages 113-123]
Sliding Mode Robust Sliding Mode Controller Design for the Complete Model of an Aircraft in the Presence of a Variety of Uncertainties [Volume 18, Issue 3, 2022, Pages 169-180]
Sliding Mode Motion Trajectory Control and Robust Control Based on Nonlinear Bicycle Model to Stabilization for In-wheel Motor Electric Vehicle in Emergency Scenario [Volume 20, Issue 1, 2024, Pages 109-124]
Sliding Mode Control [Volume 13, Issue 4, 2017, Pages 59-69]
Sliding Mode Control Optimal Control of an Aircraft Pitch Angle using PID and Sliding Mode Control Based on PSO Algorithm [Volume 15, Issue 4, 2019, Pages 49-66]
Sliding Mode Control Design of a Sliding Mode Controller with Optimal Parameters for Three-Dimensional Guidance Law Using Harmony Search Algorithm [Volume 16, Issue 1, 2020, Pages 31-38]
Sliding Mode Control Trajectory tracking of a wheeled mobile robot using Backstepping and Sliding mode approaches [Volume 16, Issue 1, 2020, Pages 83-98]
Sliding Mode Control Integrated Control of Active Suspension and Anti-lock Braking System Based on the Nonlinear Improved Sliding Mode Control System [Volume 16, Issue 4, 2020, Pages 61-70]
Sliding Mode Control The Design and Comparison of Backstepping Fuzzy Control and Fuzzy Sliding Mode Control for Controlling Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 17, Issue 3, 2021, Pages 17-36]
Sliding Mode Control Online Methods for the Identification of Aircraft Model: Review and Comparison [Volume 17, Issue 4, 2021, Pages 109-117]
Sliding Mode Control Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
Sliding Mode Control Robust Stabilization and Active Vibration Control of a Rigid-Flexible Multibody System Using Time-Varying Sliding Mode Algorithm [Volume 18, Issue 4, 2022, Pages 49-63]
Sliding Mode Control Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
Sliding Mode Observer In this paper, extended sliding mode observer is used for estimating of target maneuver for applying of augmented proportional navigation in terminal guidance phase of homing interceptors. Implementation of augmented proportional navigation is dependent on estimation target acceleration. Nonlinear estimation of target acceleration is desired, because of nonlinear engagement geometry in terminal phase. Therefore in this [Volume 13, Issue 4, 2017, Pages 1-10]
Sliding Surface Motion Trajectory Control and Robust Control Based on Nonlinear Bicycle Model to Stabilization for In-wheel Motor Electric Vehicle in Emergency Scenario [Volume 20, Issue 1, 2024, Pages 109-124]
Slipper Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
Smart Material [Volume 14, Issue 4, 2018, Pages 1-19]
Solid particles erosion Finite element investigation of multiple solid particle erosion of Al 7075-T6 and Ti-6Al-4V alloys [Volume 16, Issue 4, 2020, Pages 13-24]
Sound transmission loss Sound Transmission Loss of a Sandwich Cylindrical Shell with Piezoelectric Patches and Functionally Graded Materials Core [Volume 18, Issue 1, 2022, Pages 91-103]
Space Capsule [Volume 14, Issue 4, 2018, Pages 21-32]
Spacecraft Preventing Unwanted Vibrations in the Environmental Test of Random Vibrations of a Spacecraft by Power Spectrum Density Notching [Volume 19, Issue 1, 2023, Pages 17-28]
Spacecraft Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control [Volume 19, Issue 4, 2023, Pages 41-52]
Spacecraft attitude Design and Experimental Implementation of Adaptive Actuator Failure Compensator for Spacecraft Attitude Control Simulator [Volume 20, Issue 1, 2024, Pages 27-43]
Speed constraint Robust Adaptive Backstepping Control of Automated Vehicle Convoys in the Presence of Combined Actuator Fault, Parameter Uncertainties, and External Disturbance by Considering Speed Constraints [Volume 19, Issue 4, 2023, Pages 119-133]
Stability [Volume 14, Issue 1, 2018, Pages 27-38]
Stability Static and Dynamic Stability Analysis of Pipes Conveying Fluid with Different Boundary Conditions [Volume 17, Issue 1, 2021, Pages 1-10]
Stability Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
Stability Robust Adaptive Backstepping Control of Automated Vehicle Convoys in the Presence of Combined Actuator Fault, Parameter Uncertainties, and External Disturbance by Considering Speed Constraints [Volume 19, Issue 4, 2023, Pages 119-133]
Stability Analysis Nonlinear Active Steering Controller for Improvement of Vehicle Lateral Stability [Volume 15, Issue 3, 2019, Pages 47-60]
Stability Margin Adaptive Gian Scheduling Strategies for Aircraft Longitudinal Maneuvers Control [Volume 15, Issue 4, 2019, Pages 30-48]
Stable and Instable Equilibrium Points [Volume 14, Issue 4, 2018, Pages 61-74]
Stable Inversion Stable Inversion for Feedforward Control of Flexible Cooperative Manipulators [Volume 19, Issue 1, 2023, Pages 123-135]
Stagnation pressure loss Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
Star Tracker [Volume 13, Issue 4, 2017, Pages 47-58]
State Estimation with Unknown Input A Novel Approach for Estimating the Initial Alignment of INS based on the Kalman Filter and an Estimator with Unknown Input [Volume 17, Issue 1, 2021, Pages 1-11]
Static Analysis [Volume 13, Issue 4, 2017, Pages 35-46]
Static Stability [Volume 14, Issue 4, 2018, Pages 21-32]
Stellite-6 Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
Stewart Mechanism Design of Electromechanical Motion System for an Aircraft Flight Simulator [Volume 15, Issue 3, 2019, Pages 61-77]
Stiffened cylindrical shell [Volume 14, Issue 1, 2018, Pages 11-26]
Stiffened plate Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
Stopping Distance Integrated Control of Active Suspension and Anti-lock Braking System Based on the Nonlinear Improved Sliding Mode Control System [Volume 16, Issue 4, 2020, Pages 61-70]
Strapdown Seeker Line of Sight Rate Estimation Using Discrete-Time Sliding Mode Extended State Observer [Volume 18, Issue 2, 2022, Pages 51-66]
Strength [Volume 14, Issue 2, 2018, Pages 57-66]
Stress Intensity Factor [Volume 14, Issue 1, 2018, Pages 39-54]
Stress Intensity Factor Analysis of Thermal Stress Distribution Sensitivity in a Planar Solid Oxide Fuel Cell [Volume 16, Issue 4, 2020, Pages 25-37]
Strip theory Flutter Control of a Quasi-three-dimensional Wing in Simplified Unsteady Flow using Forced Jet [Volume 20, Issue 1, 2024, Pages 45-58]
Structural analysis Analysis and Optimization for a Projectile Under Stresses of Gun During Interior Ballistics [Volume 10, Issue 4, 2014, Pages 23-32]
Structured and Un-structured uncertainties Fuzzy Robust Backstepping Control Design for Control of Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 15, Issue 1, 2019, Pages 123-135]
Structured and Un-structured uncertainties The Design and Comparison of Backstepping Fuzzy Control and Fuzzy Sliding Mode Control for Controlling Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 17, Issue 3, 2021, Pages 17-36]
Suboptimal estimator Robust Control Based on Suboptimal Estimator for Highly Nonlinear Robotic Arms Influenced Model Uncertainties and Environmental Disturbance [Volume 19, Issue 4, 2023, Pages 85-101]
Sub-optimal guidance law Sum-of-Squares Optimization Based Approximate Dynamic Programming for Time-Varying Systems and Its Application in Suboptimal Guidance Law Design [Volume 18, Issue 4, 2022, Pages 89-103]
Subsonic External Air Flow Nonlinear Vibration Analysis of a Composite Cylindrical Shell on a Viscoelastic Foundation and under Subsonic External Air Flow [Volume 15, Issue 3, 2019, Pages 127-139]
Supersonic Numerical Analysis of Aerodynamic Interference of Two Passing Cylindrical Bodies at Supersonic Speeds [Volume 19, Issue 3, 2023, Pages 79-95]
Supersonic Flow Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
Supersonic Fluid Flow Aeroelastic Analysis of Reinforced Curved Panels by Nano-Graphene Plates [Volume 17, Issue 2, 2021, Pages 29-52]
Super Twisting Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
Surface effect [Volume 14, Issue 4, 2018, Pages 51-59]
Surface morphology Improving Wear Behavior of 304L Stainless Steel under Constrained Groove Pressing [(Articles in Press)]
Surface Mounting Hybrid Position/Force Control of the Macro/Micro Manipulator for Assembly of PCB Utilizing Fuzzy Control [Volume 17, Issue 2, 2021, Pages 117-128]
Surge Analysis of Instabilities in Compressor of J79 Engine [Volume 14, Issue 3, 2018, Pages 95-104]
Suspension Oscillations Active Control of Suspension Oscillations in Aircraft by using NARMA-L2 Neural Controller [Volume 19, Issue 2, 2023, Pages 41-55]
System Identification Online Methods for the Identification of Aircraft Model: Review and Comparison [Volume 17, Issue 4, 2021, Pages 109-117]

T

Taguchi Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
T-Approach Six Degree of Freedom Simulation and Hybrid Guidance of Parafoil-Payload Systems Considering Wind and Terrain Constraints [Volume 17, Issue 1, 2021, Pages 21-36]
Target Maneuver Estimation In this paper, extended sliding mode observer is used for estimating of target maneuver for applying of augmented proportional navigation in terminal guidance phase of homing interceptors. Implementation of augmented proportional navigation is dependent on estimation target acceleration. Nonlinear estimation of target acceleration is desired, because of nonlinear engagement geometry in terminal phase. Therefore in this [Volume 13, Issue 4, 2017, Pages 1-10]
Target Tracker Robot [Volume 13, Issue 4, 2017, Pages 89-98]
Teaching learning based optimization Experimental and Numerical Investigation on the Deviation of High Velocity Blunt Projectile after Impact on the Perforated Plate [Volume 17, Issue 2, 2021, Pages 71-84]
Temperature Finite Element Analysis of Formability Improvement of Aluminum Alloy AA5182-O in Warm Electrohydraulic Forming Process [Volume 15, Issue 2, 2019, Pages 91-102]
Temperature Distribution Thermoelastic Analysis of an Electromagnetic Launcher Using Finite Volume Method [Volume 15, Issue 2, 2019, Pages 67-75]
Temperature Field Nonlinear Response and Stability of Flexoelectric Nanotube Conveying Fluid under Temperature Field using Nonlocal Strain Gradient Theory [Volume 18, Issue 1, 2022, Pages 21-39]
Tensile Strength Experimental Investigation of Tensile Strength of Metal-Composite Hybrid Joints Using New Inserts in Comeld Process [Volume 19, Issue 1, 2023, Pages 29-43]
Terminal Sliding Mode Control Design of a Conntroller for Using MEMS Vibrational Gyroscope System [Volume 15, Issue 3, 2019, Pages 1-16]
Terrain Contour Matching Considering Terrain Contour MatchingSystem Requirements in the TF/TA Based Constraint Optimal Trajectory Design for UAVs [Volume 12, Issue 4, 2016, Pages 25-33]
Terrain Following/ Threat Avoidance Considering Terrain Contour MatchingSystem Requirements in the TF/TA Based Constraint Optimal Trajectory Design for UAVs [Volume 12, Issue 4, 2016, Pages 25-33]
Theory of Evidence Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Thermal and Chemical Non-equilibrium Numerical Study of Catalyst Bed Length and Particle Size Effect on the Monopropellant Thruster Specific Impulse and Thrust [Volume 16, Issue 1, 2020, Pages 53-66]
Thermal buckling Thermal Buckling and Postbuckling Analysis of Plates Reinforced with Graphene Platelets Using Differential Quadrature Method [Volume 19, Issue 4, 2023, Pages 103-117]
Thermal conductivity Experimental Study of the Effect of Effective Parameters on the Thermal Conductivity of a Five-component Hybrid Nanofluid [Volume 18, Issue 3, 2022, Pages 141-154]
Thermal conductivity coefficient Perturbation Analysis Of Heat Transfer in Porous Media with Small Thermal Conductivity [Volume 14, Issue 3, 2018, Pages 83-93]
Thermal Environment Analysis of Free Vibrations of Functionally Graded Porous Beams on Elastic Foundation in Thermal Environment Using Differential Quadrature Method [Volume 18, Issue 1, 2022, Pages 183-199]
Thermal spraying Finite Element Analysis of Thermal Sprayed Stellite-6 Coatings on Steel Substrate [Volume 19, Issue 2, 2023, Pages 25-39]
Thermodynamic analysis Exergy Analysis of a Gas to Liquid Compact Heat Exchanger as an Intercooler in Various Working Conditions [Volume 16, Issue 3, 2020, Pages 85-98]
Thermodynamic simulation Thermodynamic Simulation of Fouling and Erosion in an Industrial Gas Turbine for Power Generation Applications [Volume 19, Issue 4, 2023, Pages 53-69]
Thermoelastic Analysis Thermoelastic Analysis of an Electromagnetic Launcher Using Finite Volume Method [Volume 15, Issue 2, 2019, Pages 67-75]
Thick Plate [Volume 13, Issue 4, 2017, Pages 71-87]
Thick-walled Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
Thin-walled Buckling Analysis of Thin and Thick Cylindrical Shells Under Axial Load and External Pressure Based on First Order and Third Order Shear Deformation Theories [Volume 18, Issue 2, 2022, Pages 1-14]
Thixoforging Experimental Study and Simulation of the Effect of Temperature in Thixoforging Process, Case Study: Producing of the 62 Model Helical Gearbox Cap [Volume 15, Issue 2, 2019, Pages 145-157]
Three Body Problem Investigation of the LEO Transfer Orbit to GEO Using Lagrangian Points of the Earth-Sun System in the Presence of Perturbations [Volume 15, Issue 4, 2019, Pages 109-120]
Three lobe bearing Load Effect on the Perturbed Oscillation Damping Ability of an Unbalanced Rotor in Three Lobe Bearings [Volume 16, Issue 3, 2020, Pages 35-48]
Thrust Simulation and Thermodynamic Analysis of Twin Spool Turbofan Engine at the On Design and Off Design Conditions [Volume 15, Issue 4, 2019, Pages 95-108]
Thrust Chamber Numerical Investigation Effect of Film cooling with Mixed Heat Transfer in Wall Temperature of LRE Thrust Chamber [Volume 14, Issue 3, 2018, Pages 71-82]
Thrust measurement stand Investigating the Effect of Geometrical Parameters on the Performance of a Thrust Measurement Stand and Optimizing its Design Using Genetic Algorithm [Volume 19, Issue 1, 2023, Pages 107-121]
Time-varying formation Time Varying Formation Control of Unmanned Aerial Vehicle Multi-Agent Systems with Unknown Leader Input [Volume 17, Issue 2, 2021, Pages 53-69]
Timoshenko beam theory Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]
Titanium [Volume 14, Issue 2, 2018, Pages 89-99]
Tool Condition Monitoring Milling Tool Wear Prediction by Feed Motor Current Signal using MLPs and ANFIS [Volume 15, Issue 1, 2019, Pages 51-62]
Tool Wear Milling Tool Wear Prediction by Feed Motor Current Signal using MLPs and ANFIS [Volume 15, Issue 1, 2019, Pages 51-62]
TOPSIS Investigating the Effective Parameters on Vehicle Stability and Multi-objective Optimization of its Dynamic Indices [Volume 18, Issue 2, 2022, Pages 37-50]
Torsion actuator Implementation of Shape Memory Alloy Spring Behavior in a Mechanism as a Torsional Actuator for Position Changing of Rocket Wing [Volume 17, Issue 1, 2021, Pages 99-114]
Torsional Micro/Nano Mirror [Volume 14, Issue 4, 2018, Pages 61-74]
Total potential energy Low Velocity Impact Analysis of Laminated Composite Plates with using modified contact law [Volume 16, Issue 2, 2020, Pages 63-75]
Tracking Error Using the Lateral Tire Force to Maneuverability Increment of a Three-wheeled Vehicle During Critical Conditions [Volume 18, Issue 4, 2022, Pages 163-179]
Tractor Semi-Trailer A New Steering and Braking Control Strategy for Tractor Semi-Trailer Truck During a Critical Lane Change Maneuver [Volume 20, Issue 1, 2024, Pages 59-75]
Train Active Suspension Improving  H Control using new Robust Model Reference Sliding-Fuzzy Algorithm for High Speed Train Active Suspension System [Volume 12, Issue 4, 2016, Pages 113-123]
Trajectory Design Considering Terrain Contour MatchingSystem Requirements in the TF/TA Based Constraint Optimal Trajectory Design for UAVs [Volume 12, Issue 4, 2016, Pages 25-33]
Trajectory Optimization Optimal Reentry Guidance using a Combined Method [Volume 12, Issue 4, 2016, Pages 35-48]
Trajectory Optimization Six Degree of Freedom Simulation and Hybrid Guidance of Parafoil-Payload Systems Considering Wind and Terrain Constraints [Volume 17, Issue 1, 2021, Pages 21-36]
Trajectory Planning Automated guided of articulated heavy vehicle in traffic situation by sliding-mode controller [Volume 16, Issue 2, 2020, Pages 1-14]
Trajectory Tracking Trajectory tracking of a wheeled mobile robot using Backstepping and Sliding mode approaches [Volume 16, Issue 1, 2020, Pages 83-98]
Transient Simulation Simulation of Fuel Mechanical Control Unit for a Turbojet Engine [Volume 15, Issue 2, 2019, Pages 33-42]
Transverse injection Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse Injection behind the Ramp in Supersonic Air Crossflow [Volume 18, Issue 3, 2022, Pages 27-40]
Transversely isotropic Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
Transverse Step Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
Transverse Step Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
Transverse step&rsquo Numerical Investigation of the Effect of Changes in the Height of the Transverse Step at the Zero-step Angle on the Hydrodynamic Performance of the Single Body Planning Vessel [Volume 19, Issue 3, 2023, Pages 33-45]
Triangular plate Analytical Modeling of Triangular Plate Deflection under Gaseous Detonation Loading [Volume 18, Issue 3, 2022, Pages 41-52]
Triangular plate The Prediction of Center of Mass Displacement of Triangular Plate Using Non-dimensional Analysis [Volume 18, Issue 4, 2022, Pages 17-27]
Triangular plate Numerical Simulation of Triangular Plate Deformation Profile Under Gaseous Detonation Loading [Volume 19, Issue 1, 2023, Pages 1-15]
Triangular surfaces Experimental Investigation and Compilation of Analytical Relationships for the Calculation of Wet Surfaces in Stepped Planing Craft with Zero Step Angle [Volume 18, Issue 4, 2022, Pages 147-162]
Trust force Dynamic Analysis of a Variable Mass Sled System under Variable Forces [Volume 18, Issue 1, 2022, Pages 123-136]
Tube based Model Predictive Control Suboptimal Robust Tube Based MPC: Satellite Attitude Control Application [Volume 19, Issue 2, 2023, Pages 69-82]
Tube Core The Experimental and Analytical Response of Circular Metal Sandwich Panels with Tubular Cores under Blast Load [Volume 17, Issue 4, 2021, Pages 81-95]
Turbine Blade Numerical Analysis of Film-Cooling over the Rotating Turbine Blade Using Laterally-Diffused Hole [Volume 14, Issue 3, 2018, Pages 41-54]
Turbocharger Parametric study on the performance of a gasoline turbocharged aircraft engine at high altitudes using a one-dimensional model [Volume 16, Issue 1, 2020, Pages 67-82]
Turbofan Engine Design and Implementation of Model Predictive Controller for Turbofan Engine Fuel Control [Volume 15, Issue 1, 2019, Pages 1-12]
Turbofan Engine Simulation and Thermodynamic Analysis of Twin Spool Turbofan Engine at the On Design and Off Design Conditions [Volume 15, Issue 4, 2019, Pages 95-108]
Turbojet Analysis of Instabilities in Compressor of J79 Engine [Volume 14, Issue 3, 2018, Pages 95-104]
Turbojet engine Simulation of Fuel Mechanical Control Unit for a Turbojet Engine [Volume 15, Issue 2, 2019, Pages 33-42]
Turbulence Model Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow and Air Core in Open-end Pressure-swirl Atomizer [Volume 18, Issue 3, 2022, Pages 127-140]
Turbulent Flow Investigation of Laminar and Turbulent of Natural Convection of Nanofluid in a Trapezoidal Enclosure under the Influence of Magnetic Field [Volume 15, Issue 2, 2019, Pages 53-66]
Twisted Extended Fin Structure Experimental Study of the Pressure Drop and Condensed Heat Transfer of R-406a Refrigerant in Tubes Equipped with Extended Surface of Twisted Fins in Different Steps and Lengths [Volume 19, Issue 1, 2023, Pages 93-106]

U

UASR Experimental Study of Ultrasonic Assisted Surface Rolling Process [Volume 15, Issue 2, 2019, Pages 119-129]
Ultra-fine-grained materials Improving Wear Behavior of 304L Stainless Steel under Constrained Groove Pressing [(Articles in Press)]
Ultrasonic Assisted Surface Rolling Process Experimental Study of Ultrasonic Assisted Surface Rolling Process [Volume 15, Issue 2, 2019, Pages 119-129]
Ultrasonic Guided Waves [Volume 14, Issue 2, 2018, Pages 81-88]
Ultrasonic Probe [Volume 14, Issue 2, 2018, Pages 19-26]
Ultrasonic Testing [Volume 14, Issue 2, 2018, Pages 19-26]
UMAT Subroutine Buckling and Post-buckling Analysis of a Sandwich Panel with Flexible Core Reinforced with Memory Alloy Wires (SMA) [Volume 17, Issue 1, 2021, Pages 83-97]
Uncertainty Design of a Conntroller for Using MEMS Vibrational Gyroscope System [Volume 15, Issue 3, 2019, Pages 1-16]
Underactuated System In this paper, tracking control of unmanned surface vessels by using the robust mode sliding control in the presence of fixed and moving obstacles are investigated. The mathematical model of vessels is in three degree of freedom (3DOF) and only contains the kinematics and dynamics of relevant to surge, sway and yaw. These vessels are controlled in under actuated manner; although they have (3DOF), but only are equipped [Volume 13, Issue 4, 2017, Pages 11-19]
Underactuated system with two degrees of freedom Fuzzy Robust Backstepping Control Design for Control of Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 15, Issue 1, 2019, Pages 123-135]
Underactuated system with two degrees of freedom The Design and Comparison of Backstepping Fuzzy Control and Fuzzy Sliding Mode Control for Controlling Underactuated Mechanical Systems with Two Degrees of Freedom [Volume 17, Issue 3, 2021, Pages 17-36]
Underwater explosion Optimization of Effective Parameters in Free Iron Sheet Forming Process by Underwater Explosion Method [Volume 18, Issue 3, 2022, Pages 87-108]
Underwater explosion Female Die Forming of Metallic Plates using Repeated Underwater Explosions [(Articles in Press)]
Uniform heat absorption/production Analysis of Entropy and Heat Transfer of Non-Newtonian Ferrofluid Under the Effect of Various External and Internal Factors [Volume 20, Issue 1, 2024, Pages 1-25]
Uniform loading The Behavior of Quadrangular Plates under Impulsive Loading: a Dimensional Analysis [Volume 16, Issue 4, 2020, Pages 85-99]
Unmanned Aerial Vehicle Considering Terrain Contour MatchingSystem Requirements in the TF/TA Based Constraint Optimal Trajectory Design for UAVs [Volume 12, Issue 4, 2016, Pages 25-33]
Unmanned Aerial Vehicles (UAV) Optimal Formation Control for Unmanned Aerial Vehicle Teams with Collision Avoidance Constraint and Unknown Dynamics [Volume 19, Issue 1, 2023, Pages 61-79]
Unmanned Aircraft Optimal Control of an Aircraft Pitch Angle using PID and Sliding Mode Control Based on PSO Algorithm [Volume 15, Issue 4, 2019, Pages 49-66]
Unmanned Air Vehicle Multidisciplinary Design Optimization of an Unmanned Air Vehicle and Final Solution Selection Based on Fuzzy Satisfaction Degree Function [Volume 15, Issue 1, 2019, Pages 107-122]
Unmanned Small Helicopters [Volume 13, Issue 4, 2017, Pages 59-69]
Unmanned Surface Vessel In this paper, tracking control of unmanned surface vessels by using the robust mode sliding control in the presence of fixed and moving obstacles are investigated. The mathematical model of vessels is in three degree of freedom (3DOF) and only contains the kinematics and dynamics of relevant to surge, sway and yaw. These vessels are controlled in under actuated manner; although they have (3DOF), but only are equipped [Volume 13, Issue 4, 2017, Pages 11-19]
Unscented Kalman Filter [Volume 13, Issue 4, 2017, Pages 47-58]

V

Vacuum Infusion Experimental Investigation of High Velocity Projectile Penetration into Innegra Fabric Composite [Volume 20, Issue 1, 2024, Pages 125-141]
Variable properties Investigation of Laminar and Turbulent of Natural Convection of Nanofluid in a Trapezoidal Enclosure under the Influence of Magnetic Field [Volume 15, Issue 2, 2019, Pages 53-66]
Variable Stiffness Laminated Plates Investigation of Lamb Waves Propagation in Variable Stiffness Fiber Metal Laminated Plates Using Finite Element Method [Volume 19, Issue 1, 2023, Pages 81-92]
Variable valve timing Numerical Investigation of a SI-Engine Performance Equipped with a Variable Valve Timing System [Volume 14, Issue 3, 2018, Pages 55-69]
Various Boundary Conditions [Volume 13, Issue 4, 2017, Pages 21-34]
Vectorized High Order Expansions Comparing Performance of Vectorized High Order Expansions and SDRE Method for Vertical Landing Mission of Booster [Volume 18, Issue 3, 2022, Pages 69-85]
Venting hole Female Die Forming of Metallic Plates using Repeated Underwater Explosions [(Articles in Press)]
Very high speed A Guidance law for interception of very high-speed targets using a simulator-based learning algorithm [Volume 16, Issue 3, 2020, Pages 49-57]
Vibration Dynamic and Vibration Analysis of Composite Cylindrical Shell with Piezoelectric Layers [Volume 16, Issue 2, 2020, Pages 15-25]
Vibration Vibration Suppression of a Rotating Flexible Structure using Super Twisting-Nonsingular Terminal Sliding Mode Control with Uncertainty [Volume 18, Issue 1, 2022, Pages 171-182]
Vibration and Stability Aeroelastic Analysis of Reinforced Curved Panels by Nano-Graphene Plates [Volume 17, Issue 2, 2021, Pages 29-52]
Vibrations Vibrations of a Rotating Functionally Graded Cylindrical Shell under Pressure with Ring and Stringer Stiffened [Volume 15, Issue 4, 2019, Pages 1-14]
Vibration signal [Volume 14, Issue 4, 2018, Pages 101-113]
Viscoelastic Foundation Nonlinear Vibration Analysis of a Composite Cylindrical Shell on a Viscoelastic Foundation and under Subsonic External Air Flow [Volume 15, Issue 3, 2019, Pages 127-139]
Viscosity Experimental and Comparative Study of Thermophysical Properties of Different Nanofluids with the Aim of Selecting the Best Nanolubricant [Volume 18, Issue 2, 2022, Pages 125-142]
Volumetric radiation Analysis of Entropy and Heat Transfer of Non-Newtonian Ferrofluid Under the Effect of Various External and Internal Factors [Volume 20, Issue 1, 2024, Pages 1-25]
Vortex shedding Analysis and Experimental Investigation of Pressure Oscillation in the Combustion Chamber of a Subscale Solid Rocket Motor [Volume 16, Issue 1, 2020, Pages 39-52]
V-Shaped cantilever Numerical and Experimental Analysis of V-Shaped Atomic Force Microscope Cantilever Vibrations by Considering Polyvinyl Alcohol Nanofibers as the Sample [Volume 18, Issue 1, 2022, Pages 105-122]

W

Warm Electrohydraulic Forming Finite Element Analysis of Formability Improvement of Aluminum Alloy AA5182-O in Warm Electrohydraulic Forming Process [Volume 15, Issue 2, 2019, Pages 91-102]
Warm Hydroforming [Volume 14, Issue 2, 2018, Pages 43-55]
Wavelet Decomposition Determine the Remaining Useful Life in Rotating Equipment, based on Prognostics and the combination of Degradation Processes, Using the ARMRS & Theory of Evidence [Volume 15, Issue 4, 2019, Pages 15-29]
Wave Propagation [Volume 14, Issue 2, 2018, Pages 81-88]
Wave Propagation Evaluation of Wave Propagation in a Transversely Isotropic Monolayer with Finite Thickness by the Potential Functions Method [Volume 18, Issue 3, 2022, Pages 13-26]
Wear Multi-Sensory Data Fusion System for Tool Condition Monitoring Using Optimized Artificial Fuzzy Inference System [Volume 15, Issue 2, 2019, Pages 103-118]
Wear rate Improving Wear Behavior of 304L Stainless Steel under Constrained Groove Pressing [(Articles in Press)]
Welding line Uniform Blast Loading on Stiffened Rectangular Plates by Welding Line: Experimental Investigation and Modelling Using GMDH Neural Network [Volume 18, Issue 2, 2022, Pages 15-35]
Whale optimization algorithm A Model of Predictive Terminal Guidance Based on Whale Optimization Algorithm Considering the Aerodynamic Model of the Pursuer [Volume 17, Issue 1, 2021, Pages 37-50]
Wheeled Mobile Robot Trajectory tracking of a wheeled mobile robot using Backstepping and Sliding mode approaches [Volume 16, Issue 1, 2020, Pages 83-98]
Wind Estimation Six Degree of Freedom Simulation and Hybrid Guidance of Parafoil-Payload Systems Considering Wind and Terrain Constraints [Volume 17, Issue 1, 2021, Pages 21-36]
Wing in Ground Effect Vehicles Designing of a Flying Boat Height Holder Based of the Fuzzy Controller [Volume 12, Issue 4, 2016, Pages 11-23]
Workspace [Volume 14, Issue 2, 2018, Pages 1-17]
Woven Composite [Volume 14, Issue 1, 2018, Pages 39-54]

Z

Zirconia Experimental Investigation on the Impact Resistance of CAD/CAM Fabricated Dental Restorations Made of Zirconia Nano Powder Stabilized by Yttrium Oxide [Volume 18, Issue 3, 2022, Pages 1-12]